SMC Networks M8501 manual 2. Fault Symptom Codes, Message

TroubleshootingFault Symptom Codes (FSCs)

Table 6-2. Fault Symptom Codes

Message	FSC	ERP
SMX send error	A001	C, G	An attempt to place a message on a
			task’s exchange generated a kernel error.
SMX receive error	A002	C, G	An attempt to receive a message from a
			task’s exchange generated a kernel error.
Comm free list empty	A003	C, G	An attempt to acquire a message from the
			free pool failed because the pool is empty.
Invalid comm. put	A004	C, G	An attempt to place a message on a
attempt			task’s exchange failed because either the
			argument message pointer was NULL or
			the argument exchange pointer was
			NULL.
Invalid comm. get	A005	C, G	An attempt to receive a message from a
attempt			task’s exchange failed because the
			argument exchange pointer was NULL.
Comm initialization	A006	C, G	The Comm manager could not be
error			initialized at power-up because the
			system is out of memory.
Put of a NULL comm.	A007	C, G	An attempt to place a Comm block on a
			task’s exchange failed the argument
			Comm block pointer was NULL.
Msg contains no	A008	C, G	A message obtained from the free pool
comm.			did not contain a Comm block.
Comm return address	A009	C, G	An attempt to return a command
in unknown			response to the originating task failed
			because the originator could not be
			determined.
Bad Image CRC	F001	F	The uploaded firmware image has a bad
			CRC and is probably corrupted.
Flash erase sector	F002	F	One of the flash memory sectors could
failed			not be programmed.
Flash program sector	F003	C, G	One of the flash memory sectors could
failed			not be erased.
Bad flash CRC	F004	C, G	The firmware image programmed into
			flash memory has a bad CRC and is
			probably corrupted.
Flash exit error	F005	C, G	Internal flash task error.
Incompatible image	F006	F	The uploaded firmware image is not
			compatible with the ACL hardware,
			possibly an older firmware version.
Buffer allocation failed	F402	F	The flash task could not allocate a buffer
			area to hold the firmware image to be
			uploaded.

M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-001

6-12