SMC Networks M8501 manual Tables

ContentsTables

Figure 2-2.	Installing the Slide Members				2-3
Figure 2-3.	Installing Slide Member Fasteners					2-4
Figure 2-4.	Tabletop Model Clearances				2-5
Figure 3-1.	Hardware Configuration			3-2
Figure 3-2.	Tape Drive’s Fibre Channel Port Connection						3-3
Figure 3-3.	LC-LC Fiber Cable		3-4
Figure 3-4.	View of Two FCSAs at the Rear of the Server						3-5
Figure 3-5.	Powering On the ACL Tape Drive					3-6
Figure 3-6.	Status Button	3-7
Figure 3-7.	Drive 1 LTO Loaded Button				3-8
Figure 3-8.	Drive Identification Button			3-9
Figure 3-9.	Viewing the Portname3-10
Figure 4-1.	Front Panel	4-1
Figure 4-2.	Magazine Door Mechanical Release4-2
Figure 4-3.	Initialization Screen		4-3
Figure 4-4.	ACL Default Screen		4-4
Figure 4-5.	Technical Support Information4-5
Figure 4-6.	Access Magazine Screen			4-6
Figure 4-7.	Move Media Screen		4-6
Figure 4-8.	Move Media Screen (Source)				4-7
Figure 4-9.	Move Media Screen (Destination)					4-7
Figure 4-10.	Power Down Initiation Screen				4-8
Figure 4-11.	Status Screen	4-9
Figure 4-12.	Menu Screen	4-10
Figure 4-13.	View ACL Options Screen (Initial Screen)4-11
Figure 4-14.	Tape Magazine With Tape Cartridges Installed						4-14
Figure 4-15.	Barcode Label Installation (LTO)					4-15
Figure 6-1.	Troubleshooting Flow Chart				6-2

Tables

Table 1-1.	Models and Slot Capacities	1-2
Table 3-1.	Fiber Cables3-3
Table 4-1.	ACL Front Panel Indicators	4-2
Table 4-2.	View ACL Options4-11
Table 6-1.	Error Recovery Procedures	6-3
Table 6-2.	Fault Symptom Codes6-3

M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-001

iii