SMC Networks M8501 manual Remove the template

Models: M8501

1 78
Download 78 pages 42.86 Kb
Page 22
Image 22

Setting Up the ACL Tape Drives

Setting up the M8501 ACL Rackmount Unit

a.Push back the tabs in the top of the template and place them in the correct holes in the mounting rack. Match up the hole pattern indicated on the sides of the template with the hole pattern in the mounting rack.

b.Make sure to begin measuring in the correct place. If a unit is already installed immediately below the planned position of the new unit, then place the template against the front of the mounting rack and rest it on top of the previously installed unit.

c.Use the front of the template to mark the attachment points for mounting brackets, rails, components, or cage nuts on the back of the storage cabinet.

d.Use the back of the template to mark the attachment points for the mounting brackets, rails, components, or cage nuts on the back of the storage cabinet.

3.Remove the template.

4.Install the slide members for the rackmount unit.

5.If the slide members are already installed, attach the front and rear mounting brackets to the outer and middle slide members.

M8501 and M8502 ACL Tape Drive Installation and User’s Guide 529972-001

2-2

Page 22
Image 22
SMC Networks M8501 manual Remove the template