SMC Networks M8501 manual 2. Fault Symptom Codes, Message

TroubleshootingFault Symptom Codes (FSCs)

Table 6-2. Fault Symptom Codes

Message	FSC	ERP
Deactivation of a drive	700F	C, G	The Control task is indicating that a
failed			request to deactivate a drive failed;
			reason is not known.
Drive removal failed	7010	C, G	The Drive task is indicating that a request
			to power-down a drive failed; reason is
			not known.
Drive is Active failed	7012	C, G	The Drive task is indicating that a request
			to determine if a drive is executing a host
			command failed; reason is not known.
Control Com	7013	C, G	During HotSwap, a command response
Unidentified			from the Control task could not be
			associated with any outstanding
			command.
Drive status updated	7014	C, G	The Drive task is indicating that a request
failed			to determine the current state of a drive
			failed; reason is not known.
Loader command	7015	C, G	The Loader task is indicating that a
execution failed			command has failed to complete
			successfully.
Sequential command	7016	C, G	The Sequential task is indicating that a
execution failed			command has failed to complete
			successfully.
Destination Xchg for	7017	C, G	Attempting to send a message to a task,
msg. was Null			but the argument exchange pointer was
			Null.
Bad src mod in peg	7018	C, G	A message was received from a remote
msg			module, but the module number was out
			of range.
A Peg message has a	7019	C, G	Peg message wrapping a Null msg. ptr.
pointer to Null.
Xchg conversion	701A	C, G	Attempt to determine the module number
failed			containing the task that is returning a
			command response failed.
Invalid L-drive number	701B	C, G	Attempt to send a command to a drive,
to convert			but the logical drive number is out of
			range.
Invalid P-drive number	701C	C, G	Attempt to send a command to a drive,
to convert			but the physical drive number is out of
			range.
Invalid mod number to	701D	C, G	Attempt to send a command to a drive in
convert			a remote module, but the module number
			is out of range.

M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-001

6-10