SMC Networks M8501 manual Inserting and Removing Tape Cartridges, Removing the Magazine

Operation Inserting and Removing Tape Cartridges

Inserting and Removing Tape Cartridges

The magazine must be removed from the ACL in order to remove or insert tape cartridges. Make sure the slot you want to use is not already reserved for a tape cartridge that is now in a tape drive. The safest way to do this is to unload all tape drives before removing a magazine. You can unload the tape drive either through your host system software or by using the “Move Media” option on the Default Screen.

Removing the Magazine

You must manually remove the ACL magazine. To access the magazine, use the “Magazine Access” option on the Default Screen. This option lets you open the left magazine door. After opening the magazine door, pull the magazine out and away from the ACL chassis.

Inserting Cartridges into the Magazine

A full magazine is shown in Figure 4-14. Note that the lowest numbered tape cartridge slot is the one closest to the front of the magazine.

Insert a tape cartridge so that the barcode labels are facing outward.

Note. Handle and store tape cartridges in a clean, dust-free environment.

M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-001

4-13