Craftsman 536.88123 To Replace Friction Wheel, Auger, End nuts, Replace bottom panel

Page 21

•

" --.exS.e.•

•

Remove the bottom panel (see last figure on page 20).

Remove the three (3) fasteners securing the friction wheel to the hub (see next fig- ure).

Remove the four bolts securing the bear- ing plates (both sides), (see figure be-

low).

Friction Wheel

3"

If adjustment is necessary:

•Remove washer and cotter pin connect- ing trunnion nut to speed rod (see figure below).

•Twist trunnion nut up or down on shift rod

to obtain the correct friction wheel posi- tion.

•Put end of trunnion nut through hole in speed control rod and reattach washer and cotter pin,

•Replace bottom panels.

Speed ControlRod

/

-,,'JTrunnion

L_

 

Bearing

 

Plate Bolts

Fasteners

 

(Bolts,

 

 

Auger

end nuts).

/

 

/

 

i

%.,-'

[

=

TO REPLACE FRICTION WHEEL

If the snow thrower will not move forward,

and the friction wheel is worn or damaged, you need to replace it as follows: (First allow the engine to cool).

•Drain the gasoline from the fuel tank by removing the fuel line at the carburetor. Drain the fuel in a container and reinstall the fuel line.

CAUTION: Drain gasoline outdoor away from fire or flame.

•Disconnect the spark plug wire.

•Stand the snow thrower up on the auger housing end,

•Disconnect speed control rod from speed

rod by removing cotter pin (see figure above). Keep trunnion in same position on speed control rod. Movement of the trunnion will result in speed changes.

•Remove right side bearing plate. Leave hex shaft in odginal position.

•Remove friction wheel from hub. Slip fric-

tion wheel off hex shaft towards right side.

•Position new fnction wheel onto hub (see first figure on page 22).

•Install bearing plates to enginal position. Ensure hex shaft is engaged with both bearing plates.

•Secure bearing plates, using bolts re- moved earlier.

•Secure friction wheel to hub using fasten- ers removed earlier. Ensure hex shaft

turns freely.

•Replace bracket to speed control lever.

•Reconnect speed control rod to speed rod by reassembling the trunnion assem- bly and cotter pin.

NOTE: Ensure friction wheel and friction disc are free from grease or oil.

•Replace bottom panel.

•Lower the snow thrower onto the tires.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Snow Thrower Contents Service and Adjustments 18-22 Warranty Storage Limited TWO-YEAR Warranty on Craftsman Snow ThrowerTraining Operation PreparationSteep sloping surfaces. do not USE Snow Thrower on Surfaces Maintenance and StorageFlatwasher 8-16 Hex Jam NutsTools Required for Assembly Glasses or eye shields while assembling snow throwerSpeed Lever To Installthe Upper Handle and Crankassembly HOW to SET UP Your Snow ThrowerAssemble Replace carriage boltSpeed Selector ROD Headlight Remote Chute Control KnobChute Chute Deflector Deflector Know Your Snow ThrowerTo Control Snow Discharge Howto Useyour Snow ThrowerTo Move Forward Backward To Stopyour SnowthrowerTo USE Wheel Lockout PIN To Throw SnowBefore Starting the Engine Checkthe OILCold Start Fill GASPush down on the starter button until Warm StartTo Start Engine Recoil Starter Be sure the auger drive and traction driveSnow Throwing Tips Frozen Recoil StarterGages. Then continue with the directions for cold start For maximum snow thrower efficiencyLubrication Chart Customer Responsibilities Service Schedule Dates RecordsLubrication Before Storage Lubrication Every 10 HoursSnow Thrower After First USE After Each USEOIL Recommendation LubricationEngine Lubrication Spark PlugTo Adjust Skid Height To Adjust Scraper BARTo Adjustthe Clutch Control Cables To Replace Belts To Adjust BeltsAuger Drive Belt Traction Drive BeltTo Adjust the Friction Wheel To Adjustthe Belt GuideAuger To Replace Friction WheelEnd nuts Replace bottom panelTo Adjust Carburetor To Adjust or Replace Spark PlugTo Adjust To Replace Auger Shear BoltEngine Storage Snow Thrower StorageOther Steps belowCorrection Trouble Cause

536.88123 specifications

The Craftsman 536.88123 is a powerful and versatile snow blower designed to tackle the toughest winter weather conditions. With its robust construction and advanced features, this machine is engineered for homeowners who desire efficiency and reliability in snow removal.

One of the standout features of the Craftsman 536.88123 is its impressive 27-inch clearing width. This wide path allows users to cover large areas quickly, making it suitable for both residential driveways and sidewalks. The snow blower is equipped with a strong and efficient 2-stage auger system that not only breaks up compact snow but also throws it far away from the cleared area. This ensures that snow is efficiently removed without simply pushing it aside, which can cause buildup over time.

Another significant characteristic of this model is its powerful 357cc engine, delivering substantial torque and performance. This engine is designed to handle heavy, wet snow with ease, providing users with the confidence to tackle even the most challenging conditions. The electric start feature adds convenience for those cold, winter mornings, allowing for easy ignition without the need for strenuous pulling.

The Craftsman 536.88123 is also designed for user comfort and ease of operation. The adjustable handle ensures a comfortable grip, and it can be modified to fit the user’s height. This snow blower features six forward and two reverse speeds, giving users full control over their snow clearing experience. The durable, rubber-edged auger not only provides efficient snow removal but also protects surfaces underneath, minimizing the risk of damage.

Additionally, the snow blower comes with a remote chute control system, allowing users to easily direct the snow discharge without having to manually adjust the chute. This feature is particularly beneficial for users who need to navigate around obstacles while working.

In terms of durability, the Craftsman 536.88123 is built with high-quality materials designed to withstand harsh conditions, ensuring longevity and dependable performance year after year.

With its combination of power, efficiency, and user-friendly design, the Craftsman 536.88123 is a top choice for those looking for a reliable solution to winter snow challenges. Whether you're clearing your driveway, sidewalk, or patio, this snow blower promises to make your winter maintenance tasks manageable and less labor-intensive.
Top Page Image Contents