Craftsman 536.88123 operating instructions Maintenance and Storage, Flatwasher, Hex Jam Nuts

Page 4

17.Disengage power to the auger/impeller

when snow thrower is transportedor not in use.

18.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as tire chains, electric start kits, etc).

19.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

MAINTENANCE AND STORAGE

1.Check shear bolts and other bolts

frequently for proper tightness to be sure the snow thrower is in safe working condition.

2.Never store the snow thrower with fuel

in the fuel tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine

to cool before stodng in any enclosure.

3.Always refer to operator's manual instructions for important details if the snow thrower is to be stored for an extended pedod.

Contents of Parts Bag

1- Owner'sManual (not shown)

1 - Parts Bag (not shown)

!- Packet of Fuel Stabilizer (not shown) Non Assembly parts are found in toolbox

located on top of belt cover. 1 - Warranty Card (not shown)

•2 - Spare Shear Bolts

•2- Spare Shear Nuts

4.Maintain or replace safety and instruc- tion labels, as necessary.

5.Run the snow thrower a few minutes after throwing snow to prevent freeze- up of the auger/impeller.

Z_ WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces.

Caution should be exercised while using on

steep sloping surfaces. DO NOT USE SNOW THROWER ON SURFACES

ABOVE GROUND LEVEL such as roofs of

residences, garages, porches or other such structures or buildings.

1-3/8-16 x 2 In. Hex Head Bolt

© ©

1 _/8 In.

1 - 3/8 In.

Flatwasher

Lockwasher

 

1- 3/8 In. Hex Nut

@©

1 - Starter Motor Cord

2- Shifter Knobs

2 - 3/8-16 Hex Jam Nuts

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Snow Thrower Limited TWO-YEAR Warranty on Craftsman Snow Thrower Contents Service and Adjustments 18-22 Warranty StorageTraining Preparation OperationMaintenance and Storage Steep sloping surfaces. do not USE Snow Thrower on SurfacesFlatwasher 8-16 Hex Jam NutsGlasses or eye shields while assembling snow thrower Tools Required for AssemblySpeed Lever HOW to SET UP Your Snow Thrower To Installthe Upper Handle and CrankassemblyReplace carriage bolt AssembleSpeed Selector ROD Remote Chute Control Knob HeadlightKnow Your Snow Thrower Chute Chute Deflector DeflectorHowto Useyour Snow Thrower To Control Snow DischargeTo Move Forward Backward To Stopyour SnowthrowerTo Throw Snow To USE Wheel Lockout PINBefore Starting the Engine Checkthe OILFill GAS Cold StartWarm Start Push down on the starter button untilTo Start Engine Recoil Starter Be sure the auger drive and traction driveFrozen Recoil Starter Snow Throwing TipsGages. Then continue with the directions for cold start For maximum snow thrower efficiencyCustomer Responsibilities Service Schedule Dates Records Lubrication ChartLubrication Every 10 Hours Lubrication Before StorageSnow Thrower After First USE After Each USELubrication OIL RecommendationEngine Lubrication Spark PlugTo Adjust Scraper BAR To Adjust Skid HeightTo Adjustthe Clutch Control Cables To Adjust Belts To Replace BeltsAuger Drive Belt Traction Drive BeltTo Adjustthe Belt Guide To Adjust the Friction WheelTo Replace Friction Wheel AugerEnd nuts Replace bottom panelTo Adjust or Replace Spark Plug To Adjust CarburetorTo Adjust To Replace Auger Shear BoltSnow Thrower Storage Engine StorageOther Steps belowTrouble Cause Correction

536.88123 specifications

The Craftsman 536.88123 is a powerful and versatile snow blower designed to tackle the toughest winter weather conditions. With its robust construction and advanced features, this machine is engineered for homeowners who desire efficiency and reliability in snow removal.

One of the standout features of the Craftsman 536.88123 is its impressive 27-inch clearing width. This wide path allows users to cover large areas quickly, making it suitable for both residential driveways and sidewalks. The snow blower is equipped with a strong and efficient 2-stage auger system that not only breaks up compact snow but also throws it far away from the cleared area. This ensures that snow is efficiently removed without simply pushing it aside, which can cause buildup over time.

Another significant characteristic of this model is its powerful 357cc engine, delivering substantial torque and performance. This engine is designed to handle heavy, wet snow with ease, providing users with the confidence to tackle even the most challenging conditions. The electric start feature adds convenience for those cold, winter mornings, allowing for easy ignition without the need for strenuous pulling.

The Craftsman 536.88123 is also designed for user comfort and ease of operation. The adjustable handle ensures a comfortable grip, and it can be modified to fit the user’s height. This snow blower features six forward and two reverse speeds, giving users full control over their snow clearing experience. The durable, rubber-edged auger not only provides efficient snow removal but also protects surfaces underneath, minimizing the risk of damage.

Additionally, the snow blower comes with a remote chute control system, allowing users to easily direct the snow discharge without having to manually adjust the chute. This feature is particularly beneficial for users who need to navigate around obstacles while working.

In terms of durability, the Craftsman 536.88123 is built with high-quality materials designed to withstand harsh conditions, ensuring longevity and dependable performance year after year.

With its combination of power, efficiency, and user-friendly design, the Craftsman 536.88123 is a top choice for those looking for a reliable solution to winter snow challenges. Whether you're clearing your driveway, sidewalk, or patio, this snow blower promises to make your winter maintenance tasks manageable and less labor-intensive.
Top Page Image Contents