Craftsman 536.88123 HOW to SET UP Your Snow Thrower, To Installthe Upper Handle and Crankassembly

Page 6

HOW TO SET UP YOUR SNOW

THROWER

NOTE: Place fuel stabilizer In a safe place untll needed for storage.

•Remove top pallet from carton.

•Cut and discard the plastic ties securing the chute rod to the upper pallet and place aside. Discard pallet.

•Cut all four comers of the carton from top to bottom and lay the panels flat.

•Cut the bands holding the snow thrower to the lower pallet.

•Remove snowthmwer from lower pallet.

•Remove the packing material from the

handle assembly and all protective material from the unit and discard.

•Cut ties securing the clutch control cables.

TO INSTALLTHE UPPER HANDLE AND CRANKASSEMBLY

•Loosen, but do not remove the screws, flatwashers, leckwashers and hex nuts in the upper holes of the lower handle. See figure below.

NOTE: Make sure the cables are not

caught between the upper and lower handle.

•Raise upper handle into operating posi- tion. Upper handle should be to the outside of the lower handle.

--_t

_/" Upper handle

Loosenscrew

Nut

_'_'hex

(Do notremove)

 

I;

_8 Flatwasher

 

 

t"

3/8" Lockwasher//_

3/8 X 2"Screw

•Install hardware supplied in the parts bag (Screw, flatwasher, Iockwasher, and he:< nut) into lower hole on right hand ,side of handles. Do not tighten until all screws are in place. See figure above.

NOTE: If the cables have become discon- nected from the clutch levers, reinstall the cables as shown in next figure.

"z" fitting

NOTE: If control cables have become unat- tached from motor mount frame, reconnect cables as show in figure below.

TractiondriveI spdng(Iong)

iAuger drive

Locate crank assembly removed earlier and remove the 3/8" nylon Iocknut and flatwasher from the eye bolt assembly. See figure below.

Reinstall flatwasher and adapter. Install eye bolt through lower hole in the left

hand side of the handle. See figure be- low.

install the 3/8" flatwasher and the 3/8" ny- lon Iocknut on the eye bolt as shown in

figure below.

3/8" nylon Locknut

Eye Bolt

Boot

3/8" Flatwasher

•Carefully remove cotter pin, clevis pin and universal joint pin from yoke end of crank rod assembly as shown in first figure on page 7.

•Place univemal joint into end of worm gear lining up large holes. Insert universal joint pin (ensure opening in pin is in line with small openings in universal joint).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Snow Thrower Contents Service and Adjustments 18-22 Warranty Storage Limited TWO-YEAR Warranty on Craftsman Snow ThrowerTraining Preparation OperationFlatwasher Maintenance and StorageSteep sloping surfaces. do not USE Snow Thrower on Surfaces 8-16 Hex Jam NutsTools Required for Assembly Glasses or eye shields while assembling snow throwerSpeed Lever HOW to SET UP Your Snow Thrower To Installthe Upper Handle and CrankassemblyAssemble Replace carriage boltSpeed Selector ROD Remote Chute Control Knob HeadlightKnow Your Snow Thrower Chute Chute Deflector DeflectorTo Move Forward Backward Howto Useyour Snow ThrowerTo Control Snow Discharge To Stopyour SnowthrowerBefore Starting the Engine To Throw SnowTo USE Wheel Lockout PIN Checkthe OILFill GAS Cold StartTo Start Engine Recoil Starter Warm StartPush down on the starter button until Be sure the auger drive and traction driveGages. Then continue with the directions for cold start Frozen Recoil StarterSnow Throwing Tips For maximum snow thrower efficiencyCustomer Responsibilities Service Schedule Dates Records Lubrication ChartSnow Thrower After First USE Lubrication Every 10 HoursLubrication Before Storage After Each USEEngine Lubrication LubricationOIL Recommendation Spark PlugTo Adjust Skid Height To Adjust Scraper BARTo Adjustthe Clutch Control Cables Auger Drive Belt To Adjust BeltsTo Replace Belts Traction Drive BeltTo Adjustthe Belt Guide To Adjust the Friction WheelEnd nuts To Replace Friction WheelAuger Replace bottom panelTo Adjust To Adjust or Replace Spark PlugTo Adjust Carburetor To Replace Auger Shear BoltOther Snow Thrower StorageEngine Storage Steps belowTrouble Cause Correction

536.88123 specifications

The Craftsman 536.88123 is a powerful and versatile snow blower designed to tackle the toughest winter weather conditions. With its robust construction and advanced features, this machine is engineered for homeowners who desire efficiency and reliability in snow removal.

One of the standout features of the Craftsman 536.88123 is its impressive 27-inch clearing width. This wide path allows users to cover large areas quickly, making it suitable for both residential driveways and sidewalks. The snow blower is equipped with a strong and efficient 2-stage auger system that not only breaks up compact snow but also throws it far away from the cleared area. This ensures that snow is efficiently removed without simply pushing it aside, which can cause buildup over time.

Another significant characteristic of this model is its powerful 357cc engine, delivering substantial torque and performance. This engine is designed to handle heavy, wet snow with ease, providing users with the confidence to tackle even the most challenging conditions. The electric start feature adds convenience for those cold, winter mornings, allowing for easy ignition without the need for strenuous pulling.

The Craftsman 536.88123 is also designed for user comfort and ease of operation. The adjustable handle ensures a comfortable grip, and it can be modified to fit the user’s height. This snow blower features six forward and two reverse speeds, giving users full control over their snow clearing experience. The durable, rubber-edged auger not only provides efficient snow removal but also protects surfaces underneath, minimizing the risk of damage.

Additionally, the snow blower comes with a remote chute control system, allowing users to easily direct the snow discharge without having to manually adjust the chute. This feature is particularly beneficial for users who need to navigate around obstacles while working.

In terms of durability, the Craftsman 536.88123 is built with high-quality materials designed to withstand harsh conditions, ensuring longevity and dependable performance year after year.

With its combination of power, efficiency, and user-friendly design, the Craftsman 536.88123 is a top choice for those looking for a reliable solution to winter snow challenges. Whether you're clearing your driveway, sidewalk, or patio, this snow blower promises to make your winter maintenance tasks manageable and less labor-intensive.
Top Page Image Contents