Craftsman 536881851 manual Engine Specifications, Snow Thrower, Auger Drive Belt, Auger Gear BOX

Page 19

ENGINE SPECIFICATIONS

HORSEPOWER

8.SHP

 

DISPLACEMENT

249 cc

 

BORE

75rnm (2.970

in.)

STROKE

56ram (2.205

in.)

GASOLINE

3 quarts

 

CAPACITY

(unleaded)

 

OIL CAPACITY

 

 

(18 oz capacity)

5W30

 

SPARK PLUG:

Champion RJ19LM

 

(Gap .030 in.) or

 

equivalent

 

VALVE

Intake: 0.004-0.006

in.

CLEARANCE: Exhaust: 0.009-0.011 in.

ARMATURE

 

AIR GAP:

0.010-0.014 in.

POWER RATINGS

The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automo- tive Engineers) code J1940 (Small Engine Power & Torque Rating Proce- dure) (Revision 2002-05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual =on-site"power). This difference is due to a variety of factors including, but not limited to, the following: differ- ences in altitude, temperature, baro- metric pressure, humidity, fuel, engine lubrication, maximum governed engine speed, individual engine to engine variability, design of the particular piece of power equipment, the manner in which the engine is operated, engine run-in to reduce friction and clean out of

combustion chambers, adjustments to the valves and carburetor, and other

factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not

necessarily match the values derived using the foregoing codes.

SNOW THROWER

AUGER DRIVE BELT

Adjust the auger drive belt after the first 2 to 4 hours of use, again about mid- season and twice each season thereaf-

ter (See to "Belt Adjustment" in the

Service and Adjustment section),

CHAIN LUBRICATION

EVERY 25 HOURS

1.Position speed selector lever in first

(1) forward gear.

2.Stand the snow blower up on the auger housing end.

NOTE: When the crank case if filled with oil, do not leave the snow blower standing up on the auger housing for an extended period of time,

3.Remove the bottom panel.

4.Lubricate the chains with a chain type lubricant.

5.For storage, wipe the hexshaft and sprockets with 5W30 motor oil.

NOTE: Clean all excess grease or oil found on the rubber friction wheel or the disc drive plate.

CAUTION: Do not allow grease or oil to contact the rubber friction wheel or the disc drive plate,

6.Install the bottom panel.

Chain

AUGER GEAR BOX

The auger gear box is lubricated at the factory and should not require addition- al lubrication. If for some reason the lubricant should leak out, have auger gear case checked by a competent re- pairman.

19

Image 19
Contents Operators Manual Snow Thrower Safety Rules and Operating InstructionsAssembly Warranty StatementSafety Rules International SymbolsPreparation TrainingOperation Maintenance and Storage Control and Operating SymbolsSafetyWarningSymbols Contents of Parts BAG Actual Size To Remove Snow Thrower from Carton Tools Required for AssemblyCable back away from the motor Raise the upper handle intooperat- ing position To Assemble the Handle and Crank AssemblyDeflector HOW to Assemble the ChuteHOW to SET the Length of the Cables HOW to SET the Skid HeightAll assembly instructionshave been completed ChecklistKnow Your Snow Thrower To Stop Your Snow Thrower HOW to Move Forward and BackwardTo Control Snow Discharge To USE Wheel Lockout PINTo Add Oil Make sure the unit is level Before Starting the EngineFill GAS Check the OILPosition. Backfire or engine damage To Stop EngineTo Start Engine Be stale from long periodsof storage in the containerPage Frozen Starter Snow Throwing Tips To Remove Snow from AugerSnow should be discharged down windwhenever possible After Each USE Customer ResponsibiutiesIO0 General RecommendationsChain Lubrication Every 25 Hours Engine SpecificationsSnow Thrower Auger Drive BeltHours of use EngineCheck the spark plug every twenty Porcelain is cracked, or everyTo Adjust Scraper BAR To Adjust Skid HeightHOW to Remove Snow Hood Traction Drlve Belt Belt Adjustment18, Install the bottom panel see HOW to Replace the BeltsInstall the auger drive belt onto the engine pulley Install the bolt cover. Tighten screw See FigureTractionDrive Spring Disconnectthe spark plug wire HOW to Check Adjust the Cables Belt Guide AdjustmentAuger Drive Cable Adjustment Traction Drive Cable Adjustment HOW to Adjust or Replace the Friction Wheel Chin FrictionWheel in this section Install the bottom panel see FigureMake sure the hex shaft turns free- ly HOW to Replace Other Thoroughly clean the snowthrowerCause TroubleCorrection Time listedbelow,provided there has been Verter. Also includedmay be connectorsWhere a warrantable condition exists System on your enginefor the periodsofInstructions Engine running Craftsman 8.5HP Snow Thrower Engine Key Craftsman 8.5HP Snow Thrower Engine16o Key Description Gear CaseCraftsman 8.5HP Snow Thrower Drive #42x19.00 Craftsman 8.5HP Snow Thrower Discharge Chute Craftsman 8.5HP Snow Thrower Discharge Chute Craftsman 8.5HP Snow Thrower Auger Housing Craftsman 8.5HP Snow Thrower Auger Housing Craftsman 8.5HP Snow Thrower Handle Craftsman 8.5HP Snow Thrower Handle Craftsman 8.5HP Snow Thrower Chute ROD Craftsman 8.SHP Snow Thrower Chute ROD Craftsman 8.5HP Snow Thrower Shift Yoke Craftsman 8.5HP Snow Thrower 536.881851 Wheels Pa No 772Page Briggs & STRAnONENGINEMODEL 15A114-0342-E1 Key Briggs & STRAI-FONENGINEMODEL 15A114-0342-E1Model 15A114-0342-E1 Briggs & Stratton Engin EBriggs & STRAI-IONENGINE 601 vyl Briggs & Stratton Engine 100 Reparacionde Averlas Ensamblaje Pedidode PIEZAS/SERVICIOPreparaci N CAPACITACI6NPREPARACIbN CapacitacionNecteel cabledela bujiay mantdngalo Mantenimiento Y AlmacenamientoSimbolos DE Control Y OPERACI6N Abajo SiMBOLOS DE Control Y OperacinContenido DE LA Bolsa DE Partes Iamaioreal Tarjeta de garantia no se muestraHerramientas Necesarias CMO Sacar EL Quitanieves DE LA CajaCMO Ensamblar EL Mango Y EL Conjunto DE LA ManivelaCMO Ajustar LOS Patines DE Altura CMO Ensamblar EL Deflector DEL Tubo DE DescargaCMO Establecer LA Longitud DE LOS Cables Usta DE REVISI6N Atr Conozca SU QuitanievesCmousar EL Pasadorde Enganchede LA Rueda Como Controlarla DescargadeComoavanzary Retroceder Lanzamientode NievePara aadir aceite CombustibleAntes DE Encenderel Motor Antes DE Arrancar EL MotorArranquedel Motor Paradadel MotorC6mo hacer arrancarel motoren frio Manija del arranque manualse enrolle lentamente CGmohater arrancarun motor calienteConsejos Sobre EL Lanzamiento DE Nieve Comoquitarlanievey Escombrosatascadosde LabarrenaIiiii iiiiii!iiii!!ii!iiiiiiiiiiiiiii!iii Valvula JuegodeLubricacin MotorAjustela barra raspadoraa la posici6n correcta Ajuste DE Labarra RaspadoraQuite el estrangulador vea la Figura Como Desmontar LA Cubierta ProtectoraCMO Reemplazar I.AS CO- Rreas Ajuste DE LAS CorreasVuelva a poner la cubierta de la correa PersonaPanel inferior Figura Afloje los pernos Cada lado delQuite el panel inferior Retire pemos Apriete los pernos a ambos lados del panel inferior CMO Revisar Y Ajustar LOS Cables Ajustes DE LA Correa GujaAjustes DEL Cable DE Propulsicn CMO Ajustar O Reemplazar LA Rueda DE Friccin Var ,*,nt,o,, oC6mo reemplazar la rueda de fricci6n Figura Brazosdel impulsor \ Cojinetes Arandela CMO Reemplazar LOS Pernos DE Seguridad DE LA Barrena Motor QuitanievesCorrea de propulsi6npor tracci6nfioja o daSada Problema CausacorreccionUSO Page Page Canada Matter Who made It, no matter who soldMY-HOME Sears Parts and Repair Center

536881851 specifications

The Craftsman 536881851 is a remarkable tool designed to meet the demands of outdoor enthusiasts and homeowners alike. This powerful snow thrower is well-engineered to tackle the harshest winter conditions, making it an essential addition to your winter toolkit.

One of the standout features of the Craftsman 536881851 is its robust engine. Powered by a reliable and efficient 208cc engine, this snow thrower delivers impressive performance. The engine provides enough power to clear snow from large driveways and walkways, ensuring that you can maintain a safe and accessible property during snowy weather.

The machine is equipped with a 24-inch clearing width, allowing it to effectively remove substantial amounts of snow in a single pass. This feature not only saves time but also makes the task of snow removal less labor-intensive. The adjustable height of the chute lets users direct snow where they want it, whether that be onto the lawn or away from pathways.

In terms of technology, the Craftsman 536881851 features a 6-speed transmission, with 5 forward speeds and 1 reverse speed. This versatility allows users to choose the ideal speed for the given conditions, making it easier to maneuver through deep and heavy snow. The inclusion of large, durable tires ensures excellent traction, allowing you to navigate through slippery and uneven terrain with ease.

Safety and control are also significant aspects of the Craftsman 536881851. The design includes an ergonomic handle, ensuring a comfortable grip during operation. Additionally, the snow thrower features an electric start system, eliminating the hassle of manual starting in cold weather conditions. This technology enhances user convenience and efficiency, allowing you to get started quickly without the struggle often associated with cold-start engines.

Furthermore, the Craftsman 536881851 is designed for durability. The construction is robust, ensuring that it withstands the rigors of winter use. The heavy-duty components and sturdy frame contribute to the long-lasting performance of the snow thrower, making it a worthwhile investment.

In conclusion, the Craftsman 536881851 combines power, efficiency, and technology in a single package. Its impressive engine, effective clearing capabilities, adjustable chute, and user-friendly design make it a top choice for anyone looking to take on winter weather challenges efficiently and safely. Whether you're a homeowner looking to clear your property or someone who needs to manage snow in a commercial capacity, this snow thrower is sure to meet your needs and exceed expectations.