Intel SE7500WV2 manual Hot Keys, Power-On Self-Test Post, To Do This, Press These Keys

Page 40

Table 5. Configuration Utilities (continued)

Utility

BIOS Update Utility

Firmware Update Utility

FRU/SDR Load Utility

Description and brief procedure

Use to update the BIOS or recover from a corrupted BIOS update.

Use to update BMC flash ROM or other firmware.

Use to update the Field Replaceable Unit (FRU) and Sensor Data Record (SDR) flash components.

NOTE: You must run the FRU/SDR Load utility whenever the BMC is updated or if you change your processors.

Page

50, 56

57

57

Hot Keys

Use the numeric pad of the keyboard to enter numbers and symbols.

Table 6. Hot Keys

To Do This:

Secure your system immediately.

Enter the Adaptec SCSI Utility during POST.

Enter the Promise Technology IDE RAID Utility.

Enter BIOS Setup during POST.

Abort memory test during POST.

Display a menu for selecting the boot device.

To remove the splash screen.

Press These Keys

<Ctrl+Alt>+hot key (Set your hot key combination with the SSU or BIOS Setup)

<Ctrl+A> (SCSI version only)

<Ctrl+F> (ATA version only)

<F2>

<ESC> (Press while BIOS is updating memory size on screen)

<ESC> (Press anytime after memory check)

<ESC>

Power-On Self-Test (POST)

Each time you turn on the system the BIOS begins execution of the Power-On Self-Test (POST). POST discovers, configures, and tests the processors, memory, keyboard, and most installed peripheral devices. The time needed to test memory depends on the amount of memory installed. POST is stored in flash memory.

1.Turn on your video monitor and system. After a few seconds, POST begins to run and displays a splash screen.

2.While the splash screen is displayed:

•Press <F2> to enter the BIOS Setup (see “BIOS Setup”)

OR

•Press <Esc> to view POST diagnostic messages and change the boot device priority for this boot only (see “Temporarily Changing the Boot Device Priority” on page 41).

40	Intel Server Board SE7500WV2 Product Guide

Image 40

Contents Intel Server Board SE7500WV2 Product Guide Page Contents Configuration Software and Utilities UpgradingSolving Problems Equipment Log and Power Consumption WorksheetsTechnical Reference Regulatory and Integration InformationFigures TablesServer Board Features Server Board FeaturesDescription Server Board VersionsServer Board Connector and Component Locations Server Board Connector and Component LocationsBack Panel Connectors Back Panel ConnectorsProcessor MemoryPCI Riser Slots VideoScsi Controller ATA-100 ControllerNIC Connector and Status LEDs Network ControllerKeyboard and Mouse RJ-45 Serial PortRear Serial 2 Port Adapter Pin-out RJ-45 SignalAbbreviation System Management Baseboard Management ControllerSystem Event Log Field Replaceable Units and Sensor Data RecordsPlatform Event Management Intel Server Management Emergency Management PortEMP and Serial Over LAN Intrusion Switch Monitoring Using PasswordsSecurity Software LocksSecure Mode Summary of Software Security Features Software Security FeaturesBoot without keyboard Installation Procedures Rearrange the StandoffsInstall the Server Board Installing the Server BoardInstall the Processor Retention Brackets Installing ProcessorsLower the locking bar completely Installing the Heat Sink Installing the Heat Sink Clip Installing Memory Connecting Cables Connect CablesInstalling a Service Partition on the Server Optional Installing Intel Server Management Installing your Operating SystemInstalling Intel SMaRT Tool Upgrading Tools and Supplies NeededInstalling DIMMs Processors Adding or Replacing a ProcessorLower the locking bar completely Installing the Heat Sink Replacing the Back up Battery Removing a ProcessorReplacing the Back up Battery Intel Server Board SE7500WV2 Product Guide Configuration Software and Utilities Service Partition OptionalConfiguration Utilities System Software Update SequencePower-On Self-Test Post Hot KeysHot Keys To Do ThisIf Bios Setup Is Inaccessible Bios SetupTemporarily Changing the Boot Device Priority When to Run the Adaptec SCSISelect Utility Configuring the Adaptec AIC-7899 Scsi AdapterRunning the Adaptec SCSISelect Utility Running the SCSISelect UtilityWhen to Run the Promise FastBuild Utility Running the Promise FastBuild UtilityDirect Platform Control DPC Console Running the Promise FastBuild UtilityDPC Console Modes of Operation Running the DPC Console Using the System Setup UtilityCreating SSU Diskettes Working with the SSU Interface Running the SSUCustomizing the SSU Interface Setting Boot Device Priority Setting Passwords and Security OptionsSetting the Administrator Password Exiting the SSUSetting Security Options Setting the User PasswordViewing the System Event Log Viewing FRU Information Viewing Sensor Data RecordsUpdating System Firmware and Bios Updating the BiosUpdating the Firmware Verifying the FirmwareSaving and Restoring the System Configuration Saving a ConfigurationRestoring a Configuration Setting Up Paging AlertsIntel Server Board SE7500WV2 Product Guide Setting Up LAN Alerts Setting Up Remote Modem or Serial Access Setting Up Remote LAN AccessManaging the Server Remotely Software Updates Creating a Bootable DisketteRecovering the Bios Software Update PackageRunning the Firmware Update Utility Firmware Update Utility DescriptionFRU/SDR Load Utility Description Command Line Format CommandWhat You Need to Do How You Use the FRU/SDR Load UtilityPrompting for Product Level FRU Information Intel Server Board SE7500WV2 Product Guide Solving Problems Resetting the SystemChecklist Initial System StartupRunning New Application Software After the System Has Been Running CorrectlyMore Problem Solving Procedures Monitoring PostVerifying Proper Operation of Key System Lights Confirming Loading of the Operating SystemPower Light Does Not Light Specific Problems and Corrective ActionsNo Characters Appear on Screen System Cooling Fans Do Not Rotate Properly Characters Are Distorted or IncorrectDiskette Drive Activity Light Does Not Light Problems with Network Problems with Application SoftwareBootable CD-ROM Is Not Detected CD-ROM Drive Activity Light Does Not LightAdd-in adapter stopped working without apparent cause Cannot Connect to a ServerIntel Server Board SE7500WV2 Product Guide What it does at system reset Technical ReferenceServer Board Jumpers Jumper NameDiagnostic LEDs Diagnostic LED Decoder PostPost Codes Code0Fh 2Bh Off 2Dh 82h Off Post Error Codes and Messages Standard Post Error Messages and CodesError Code Error Message119 11A 11B 11E 120 121 140 141 142 143 144 145 146 Extended Post Error Messages and Codes Bios Recovery Beep Codes Bootblock Error Beep CodesBios Recovery Beep Codes Bootblock Error Beep CodesIntel Server Board SE7500WV2 Product Guide Product Safety Compliance Regulatory and Integration InformationProduct Regulatory Compliance Product EMC ComplianceProduct Regulatory Compliance Markings Electromagnetic Compatibility Notices FCC USAEurope CE Declaration of Conformity Bsmi TaiwanEquipment Log and Power Consumption Worksheets Equipment LogManufacturer Name Serial Number Date InstalledModel Number Calculating Power Consumption Worksheet, Calculating DC Power UsagePower Usage Worksheet Current UsageVoltage level and total current V X a = W Worksheet, Total Combined Power Used by the SystemTotal Watts For each voltage level Index Intel Server Board SE7500WV2 Product Guide