Intel SE7500WV2 manual Technical Reference, Server Board Jumpers, Jumper Name

6 Technical Reference

Server Board Jumpers

5
	A
	J5A2
6	2
	3	E
	1	J4B2
	J1D4
B CMOSCLR/
C PSWDCLR/
D RCVR/BOOT
		OM14142

Figure 21. Jumper Locations

Table 12. Configuration Jumper

A

B

C

Jumper Name

RJ-45 Serial Port Config

CMOS CLR

PSWD CLR

What it does at system reset

Configures either a DSR or a DCD signal to the connector. See page 13.

If these pins are jumpered, the CMOS settings are cleared. These pins should not be jumpered for normal operation.

If these pins are jumpered, the password is cleared. These pins should not be jumpered for normal operation.

D

RCVRY BOOT

If these pins are jumpered, the system will attempt BIOS recovery. These pins should not be jumpered for normal operation.

E

BMC Boot Block Write Enable

If these pins are jumpered, BMC boot block is erasable and programmable at next reset. These pins should not be jumpered for normal operation.

69