Sanyo Projector owner manual Network Set-up and Operation

Page 1

Owner’s Manual

Network Set-up and Operation

Wired Setting

Projector Set-up and Operation

This is the manual for the Network function.

Read this manual thoroughly to operate the Network function.

First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions.

The safety instructions in the owner's manuals should be followed strictly.

Image 1

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Internet Intranet FeaturesRequired operating environment for computers Network specifications of the projectorUse of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example255.255.0.0 169.254.100.100255.255.255.255 Setup Procedures Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Sets Dhcp configuration ON/OFF Network configurationMail setting Setting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Check / DeleteError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalTrap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next PJ statusStatus Description About projector conditionInput ControlSystem Meet the input signal are listedItem Description Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorScreen mode Video Lens adjustmentInput source Normal Full Wide169 Zoom True Natural wide CustomSetting Stores the adjustment values. Select a Resets the settings of Picture in PictureMode no. User1 User5 from the pull Clear the adjustment values. SelectRemote control Default, OFFSets on or off the logo display on Shutter management...Sets the shutter management operationTime, Network PIN code, Network setting Sets the color of the contents. ColorSettings, etc Sets the digital processingInformation InformationItems Description Network Indication of the filter status Indication of the lamp statusStatus Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkControl Use of telnetUse the IP address assigned to the projector Command Function Password 1234 is used for the exampleC00 Power on C01 Power off C05 Input C06 C07 C08 Menu display onActive Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Operation Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KL8A