Sanyo Projector owner manual Sets on or off the logo display on, Default, OFF, Remote control

Page 42

Chapter 4 Controlling the Projector

Setting 3

Item Description

Edge blending.........Sets the seamless overlapping for

multi-screen. (ON, OFF)

Color matching...Corrects the details of color for multi- screen. (ON, OFF)

Logo	Sets on or off the logo display on
	the screen during the startup. (User,
	Default, OFF)

Filter control........Schedules the filter cleaning of the

AMC (Active Maintenance Cleaner) unit. Click "Schedule cleaning", a con- firmation display appears, and then click "OK", the filter cleaning will be scheduled.

Fan speed control...Sets the running speed for the cooling fans. (Normal, Max)

Remote control....Selects the remote control code.

(Code1 - Code8)

Power management...Sets into the selected power manage- ment mode (OFF, Ready, Shut down) if

the input signal is interrupted and no control key is pressed for the specified period of time.

Direct on	*The specified time can be set 1 to 30 min.
Direct on	Sets the power-on mode when the AC cord is connected to the outlet.
Key lock	Sets the prohibition of controls either Projector or Remote control. (OFF, Projector,
	Remote control)

PJ lock suspend...When the projector has a security of PIN code lock, disable this function temporarily by pressing Execute button.

Setting procedure

1.Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.

2.Access this page with the web browser.

3.Click Execute button on the PJ lock suspend.

Shutter

Sets the shutter operation. (ON: close, OFF: open)

Shutter management...Sets the shutter management operation.

Effect	Sets the effect to fade in or out at opening or closing the shutter. (OFF, L1, L2)
Release .......key Sets available keys to release the shutter. (Any, SHUTTER)
Time	Sets the specified period of time when the projector shuts down after the projector
	is left with the shutter closed.
	* The specified time can be set 5 to 480 min.

42

Image 42

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Internet IntranetNetwork specifications of the projector Required operating environment for computersExpression/Abbreviation Use of this manualTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN code169.254.100.100 255.255.0.0255.255.255.255 Setup Procedures Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesInitial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Network configuration Sets Dhcp configuration ON/OFFMail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / DeleteSetting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalUp to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need PJ statusAbout projector condition Status DescriptionControl InputMeet the input signal are listed SystemItem Description Image adjustment Image mode Video ComputerPC adjustment Setting up the projector Screen settingInput source Lens adjustmentScreen mode Video Normal Full Wide169 Zoom True Natural wide CustomSetting Mode no. User1 User5 from the pull Resets the settings of Picture in PictureStores the adjustment values. Select a Clear the adjustment values. SelectSets on or off the logo display on Default, OFFRemote control Shutter management...Sets the shutter management operationSettings, etc Sets the color of the contents. ColorTime, Network PIN code, Network setting Sets the digital processingInformation InformationItems Description Network Indication of the lamp status Indication of the filter statusStatus Chapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network To another networkUse of telnet ControlUse the IP address assigned to the projector C00 Power on C01 Power off C05 Input C06 C07 C08 Password 1234 is used for the exampleCommand Function Menu display onWeb browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? OperationWhat is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KL8A