Sanyo Projector Selects the Picture in Picture mode. P, Main picture, Sub picture, Mode

Page 41

Setting up the projector

Setting 2

Item Description

Picture in Picture...Selects the Picture in Picture mode which has been preset in the setting menu of the projector. (OFF, User1 - User5)

*The additional display items as follows: Free No mode is stored.

Stored...The mode is already stored.

Adj	The mode is not yet stored.
Mode	Selects the Picture in Picture mode. (P
Main picture	in P, P by P)
Main picture	Selects the input and signal source.
	Adjusts the size and position of the
Sub picture	main picture.
Sub picture	Selects the input and signal source.
	Adjusts the size and position of the
Frame lock	sub picture.
Frame lock	Selects the frame lock to main or sub
Reset	picture. (Main picture, Sub picture)
Reset	Resets the settings of Picture in Picture
	mode.
Store	Stores the adjustment values. Select a
	mode no. [User1 - User5] from the pull-
Mode Free	down menu.
Mode Free	Clear the adjustment values. Select
	a mode no. [User1 - User5] from the
	pull-down menu.
* Step(s)	Sets the effective steps (1-20 steps) by one pressing the +/- or Up/Down/Left/Right
	buttons to adjust them quickly.

ENGLISH

41

Image 41

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Internet Intranet FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example255.255.255.255 169.254.100.100255.255.0.0 Setup Procedures Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu SettingExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink?Sets Dhcp configuration ON/OFF Network configurationMail setting Setting Smtp authentication Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Check / DeleteError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter community name to send Trap. Default name is public Snmp settingPJ information Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Service in need Power control and status checkDisplays the status of the projectors power. Refer to next PJ statusStatus Description About projector conditionInput ControlItem Description Meet the input signal are listedSystem Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorScreen mode Video Lens adjustmentInput source Normal Full Wide169 Zoom True Natural wide CustomSetting Stores the adjustment values. Select a Resets the settings of Picture in PictureMode no. User1 User5 from the pull Clear the adjustment values. SelectRemote control Default, OFFSets on or off the logo display on Shutter management...Sets the shutter management operationTime, Network PIN code, Network setting Sets the color of the contents. ColorSettings, etc Sets the digital processingItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Command Function Password 1234 is used for the exampleC00 Power on C01 Power off C05 Input C06 C07 C08 Menu display onProxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Operation Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KL8A