Sanyo Projector Sets the digital processing, Image faster. OFF, Low, Mid, High, Lowing items

Page 43

Setting up the projector

Setting 4

Item	Description

Video delay control	Sets the digital processing of the
Closed caption	image faster. (OFF, Low, Mid, High)
	Sets the closed caption function.
Closed caption	Sets the closed caption mode. (OFF,
	CC1, CC2, CC3, CC4)
Color	Sets the color of the contents. (Color,
Filter counter(h)	White)
	Displays the filter counter. Reset the
	time after replacement of the AMC
	(Active Maintenance Cleaner) unit.
	Click "Reset", a confirmation display
	appears, and then click "OK", the time
	will be reset.
	* Do not reset the Filter counter
	when the filters (the electrostatic pleated filter and electrostatic honeycomb fil-
	ter) are not replaced.

Filter counter

remaining(%)..........Displays the remaining time every 10% until the specified time comes.

Filter warning.........Sets the time to indicate the filter warning message on the screen. (OFF, 4000H,

8000H, 12000H, 16000H)

*When using the optional "Smoke Resistant Filter", the setting time will be OFF, 10H, 15H, 20H.

Auto cleaning timer....	Sets the interval time of the auto cleaning filter. (50H, 100H, 150H)
Freeze	Sets the image to freeze mode. (ON, OFF)
Test pattern	Sets the preset image of the projector. (OFF, Color, Gradation1 - Gradation4, All
Factory default	white, All black, Cross)
Factory default	Sets all of the projector control items to the factory default setting except the fol-
	lowing items.
	User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
	time, Network PIN code, Network setting
	* This function is not effective for the settings of Network address settings, e-mail
	settings, etc.

ENGLISH

43

Image 43

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Internet Intranet FeaturesRequired operating environment for computers Network specifications of the projectorUse of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example255.255.0.0 169.254.100.100255.255.255.255 Setup Procedures Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the passwordSets Dhcp configuration ON/OFF Network configurationMail setting Check / Delete Setting Smtp server and administrator addressSetting Smtp authentication Registering and deleting E-mail addressesError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ informationTrap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector PJ status Power control and status checkService in need Displays the status of the projectors power. Refer to nextStatus Description About projector conditionInput ControlSystem Meet the input signal are listedItem Description Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorNormal Full Wide169 Zoom True Natural wide Custom Lens adjustmentScreen mode Video Input sourceSetting Clear the adjustment values. Select Resets the settings of Picture in PictureStores the adjustment values. Select a Mode no. User1 User5 from the pullShutter management...Sets the shutter management operation Default, OFFRemote control Sets on or off the logo display onSets the digital processing Sets the color of the contents. ColorTime, Network PIN code, Network setting Settings, etcInformation InformationItems Description Network Indication of the filter status Indication of the lamp statusStatus Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkControl Use of telnetUse the IP address assigned to the projector Menu display on Password 1234 is used for the exampleCommand Function C00 Power on C01 Power off C05 Input C06 C07 C08Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Operation Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KL8A