Sanyo Projector owner manual Network PIN code setting, PJLink and password setting, Whats PJLink?

Page 23

Initial setting

Network PIN code setting

This is to set the Network PIN code to restrict the access from an unauthorized person through the network.

Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector begins restarting and it takes

about 10 seconds. Close (Quit) the web browser and access to the login page again in 10 seconds. This is to perform the login authentication firmly.

The default Network PIN code [0000] means no Network PIN code is set.

✐When you connect the projector to the network, it is recommended to set a new Network PIN code. Only a four-digit number is valid for the Network PIN code.

PJLink and password setting

This is to set the PJLink password authentica- tion on or off. If set "ON" with the PJLink pull- down menu, the password must be required. Enter a password* onto the text box and click Set button.

✐1 to 32 alphanumeric characters can be used for the password.

What's PJLink?

The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring. This standard was established by the Japan Business Machine and Information System Industries Association (JBMIA). Please visit the Website at http://pjlink.jbmia.or.jp/english/.

PJLink Notice

The projector is compliant with PJLink Standard Class 1 of JBMIA, and it supports all commands defined by PJLink Class 1 and is verified confor- mance with PJLink Standard Class 1.

	Projector Input		PJLink Input	Parameter
	Input 1	RGB (PC analog)	RGB 1	11
		RGB (Scart)	RGB 2	12
		RGB (PC digital)	DIGITAL 1	31
		RGB (AV HDCP)	DIGITAL 2	32
		HDMI	DIGITAL 3	33
		INPUT 1	AUX 1	46
	Input 2	Video	VIDEO 1	21
		Y, Pb/Cb, Pr/Cr	VIDEO 2	22
	Input 3	Y, Pb/Cb, Pr/Cr	VIDEO 2	22		ENGLISH
	Input 3	INPUT 3	AUX 3	48		ENGLISH
		RGB	RGB 3	13
		S-video	VIDEO 5	25
		INPUT 2	AUX 2	47

	Input 4	INPUT 4	AUX 4	49

23

Image 23

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Internet Intranet FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example255.255.255.255 169.254.100.100255.255.0.0 Setup Procedures Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the passwordSets Dhcp configuration ON/OFF Network configurationMail setting Check / Delete Setting Smtp server and administrator addressSetting Smtp authentication Registering and deleting E-mail addressesError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ informationClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector PJ status Power control and status checkService in need Displays the status of the projectors power. Refer to nextStatus Description About projector conditionInput ControlItem Description Meet the input signal are listedSystem Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorNormal Full Wide169 Zoom True Natural wide Custom Lens adjustmentScreen mode Video Input sourceSetting Clear the adjustment values. Select Resets the settings of Picture in PictureStores the adjustment values. Select a Mode no. User1 User5 from the pullShutter management...Sets the shutter management operation Default, OFFRemote control Sets on or off the logo display onSets the digital processing Sets the color of the contents. ColorTime, Network PIN code, Network setting Settings, etcItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Menu display on Password 1234 is used for the exampleCommand Function C00 Power on C01 Power off C05 Input C06 C07 C08Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Operation Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KL8A