Sanyo Projector owner manual Network PIN code, Numerical value is a setting example

Page 14

Chapter 2 Setup Procedures

Network PIN code

The Network PIN code is to restrict the access to the projector through the network.

After setting the Network PIN code, you need to enter it to operate the projector via the networks.

1.Select "Network PIN code" in the Network menu, and press SELECT button. The Network PIN code screen will appear.

2.Set the Network PIN code.

Set the figures with the Point ed buttons and move to the next items with the Point 7

8buttons. Select “Set” and press SELECT button to set. To cancel the preset Network PIN code, select “Cancel”. When you do not want to set the Network PIN code, set "0000".

It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. See “3. Basic setting and operation” ➔ “Initial setting” ➔ “Network PIN code setting” (p.23).

*You can also enter the Network PIN code with the number buttons on the remote control.

Network PIN code

Network PIN code screen

Network information

Select "Network information" in the Network menu and press Point 8 or SELECT button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what will be shown.)

* The numerical value is a setting example.

14

Image 14

Contents Wired Setting Projector Set-up and Operation Network Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Features Internet IntranetNetwork specifications of the projector Required operating environment for computersTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Numerical value is a setting example Network PIN code255.255.255.255 169.254.100.100255.255.0.0 Setup Procedures Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Sub menu tab Switches the sub menu tab Main menu Display of main settingMain setting page in the display SettingHow to use the setting Example of the settingSelect an item by selecting a radio button Select items by ticking on check boxesInitial setting To 32 alphanumeric characters can be used for the password Network PIN code settingPJLink and password setting Whats PJLink?Network configuration Sets Dhcp configuration ON/OFFMail setting Registering and deleting E-mail addresses Setting Smtp server and administrator addressSetting Smtp authentication Check / DeleteSetting POP server Error message for sending alert mailExamples Type and contents of alert mail PJ information Snmp settingEnter community name to send Trap. Default name is public Enter user name of the projector etc. optionalClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkService in need PJ statusAbout projector condition Status DescriptionControl InputItem Description Meet the input signal are listedSystem Image adjustment Image mode Video ComputerPC adjustment Setting up the projector Screen settingInput source Lens adjustmentScreen mode Video Normal Full Wide169 Zoom True Natural wide CustomSetting Mode no. User1 User5 from the pull Resets the settings of Picture in PictureStores the adjustment values. Select a Clear the adjustment values. SelectSets on or off the logo display on Default, OFFRemote control Shutter management...Sets the shutter management operationSettings, etc Sets the color of the contents. ColorTime, Network PIN code, Network setting Sets the digital processingItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Chapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network To another networkUse the IP address assigned to the projector Use of telnetControl C00 Power on C01 Power off C05 Input C06 C07 C08 Password 1234 is used for the exampleCommand Function Menu display onProxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting JavaScript Setting Netscape NavigatorMAC OS X v SafariWhy doesn’t the setting page appear in my web browser? How can I restrict access from the computerHow can I install several projectors? Why am I not receiving E-mail alert messages? OperationWhat is the MAC address assigned to the projector? What are the rules for IP address assignment?Can I update the firmware of the projector SO-KL8A