Sanyo Projector owner manual System, Meet the input signal are listed, Item Description

Page 35

Control

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu but- ton according to the input signal. Select a system and then click Set button.

Available selection at the RGB(PC analog) input

Item	Description

XGA1	It automatically switches to the proper computer system of the input signal.
	* The computer system modes (VGA, SVGA, XGA. SXGA, UXGA, WXGA...) which
	meet the input signal are listed.

Available selection at the RGB(PC digital)/RGB(AV HDCP)/HDMI input

Item	Description

D-XGA	It automatically switches to the proper computer system of the input signal.
	* The computer system modes (D-VGA, D-SVGA, D-XGA. D-SXGA1...) which meet
	the input signal are listed.
D-480p	It automatically switches to the proper scanning system of the input signal.
	* The selectable scanning systems are D-480p, D-575p, D-720p, D-1035i, D-1080i
	and D-1080p.

Available selection at the Video/S-video/Scart input

Item	Description

AUTO	It automatically switches to the proper color system of the input signal.
	* The selectable color systems are PAL, SECAM, NTSC, NTSC4.43, PAL-M and
	PAL-N.
	* AUTO is fixed at the Scart input.

Available selection at the Component input

Item Description

........................AUTO	It automatically switches to the proper scanning system of the input signal.
	* The selectable scanning systems are 480i, 575i, 480p, 575p, 720p, 1035i, 1080i
	and 1080p.

ENGLISH

✐ If the mode (Mode1 to Mode10) which is stored in the item "PC Adjustment" (☞ p.37) is available, they are also listed together with the above mode.

35

Image 35

Contents Network Set-up and Operation Wired Setting Projector Set-up and OperationCompliance Federal Communications Commission Notice Safety instructions Table of contents Chapter Internet Intranet FeaturesRequired operating environment for computers Network specifications of the projectorTrademarks Expression/AbbreviationUse of this manual Network Configuration has completed Flow of installationConnect the LAN and set the configuration Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Numerical value is a setting example255.255.255.255 169.254.100.100255.255.0.0 Setup Procedures Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menuExample of the setting How to use the settingSelect items by ticking on check boxes Select an item by selecting a radio buttonInitial setting Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the passwordSets Dhcp configuration ON/OFF Network configurationMail setting Check / Delete Setting Smtp server and administrator addressSetting Smtp authentication Registering and deleting E-mail addressesError message for sending alert mail Setting POP serverExamples Type and contents of alert mail Enter user name of the projector etc. optional Snmp settingEnter community name to send Trap. Default name is public PJ informationClick Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector PJ status Power control and status checkService in need Displays the status of the projectors power. Refer to nextStatus Description About projector conditionInput ControlItem Description Meet the input signal are listedSystem Image mode Video Computer Image adjustmentPC adjustment Screen setting Setting up the projectorNormal Full Wide169 Zoom True Natural wide Custom Lens adjustmentScreen mode Video Input sourceSetting Clear the adjustment values. Select Resets the settings of Picture in PictureStores the adjustment values. Select a Mode no. User1 User5 from the pullShutter management...Sets the shutter management operation Default, OFFRemote control Sets on or off the logo display onSets the digital processing Sets the color of the contents. ColorTime, Network PIN code, Network setting Settings, etcItems Description InformationInformation Network Status Indication of the lamp statusIndication of the filter status Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the networkUse the IP address assigned to the projector Use of telnetControl Menu display on Password 1234 is used for the exampleCommand Function C00 Power on C01 Power off C05 Input C06 C07 C08Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript SettingSafari MAC OS X vHow can I restrict access from the computer Why doesn’t the setting page appear in my web browser?How can I install several projectors? Operation Why am I not receiving E-mail alert messages?What are the rules for IP address assignment? What is the MAC address assigned to the projector?Can I update the firmware of the projector SO-KL8A