Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical positions to conform to your computer.
Direct Operation | Remote Control |
The Auto PC adjustment function can be operated directly with the AUTO PC button on the remote control.
Menu Operation
| Auto PC Adj. |
1 | Press the MENU button to display the |
| Menu. Use the Point 7 8 buttons to move the red |
| frame pointer to PC Adjust Menu. |
2 | Use the Point ed buttons to move the red frame |
| pointer to Auto PC Adj. and then press the SELECT |
button twice.
To store the adjusted parameters
The system parameters adjusted in the Auto PC Adjustment can be stored in the projector. Once parameters are stored, the setting can be done just by selecting a Mode in the PC System Menu (p.26). See “Store” on page 29, for details.
✔Note:
•Fine sync, Total dots, Horizontal, and Vertical positions of some computers cannot be fully adjusted with this Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required
•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.26).
AUTO PC button
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer to the Auto PC Adj. item and press the SELECT button.
“Please wait...” appears while Auto PC adjustment is in process.
http://www.pureglare.com.au | 27 |