Setting
Ceiling
When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.9). Select Computer 2 or Monitor Out with the Point 7 8 buttons.
Computer 2……computer input
Monitor Out……monitor out
Terminal function is not available when Computer 2 to the input source is selected. Change the input source to the others (Computer1 or Video) so that the Terminal function is available (pp.25,
Ceiling |
Rear |
44 | http://www.pureglare.com.au |