Sanyo PLC-XL45 owner manual Custom, Digital zoom +

Computer Input

Custom

Adjust the screen scale and position manually with this function.

Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears.

Scale H/V………Adjust the Horizontal/Vertical screen scale.

H&V ……………When set to “On,” the aspect ratio is fixed.

“Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio.

Position H/V……Adjust the Horizontal/Vertical screen

position.

Common……… Save the adjusted scale to all the inputs.

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used.

Reset………… Reset the all adjusted values. Press

the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.”

For zooming in and out the images

Digital zoom +

When Digital zoom + is selected, the On-Screen Menu disappears and “D. zoom +” is displayed. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size.

A projected image can be also expanded by pressing the D.ZOOM e button on the remote control.

Digital zoom –

When Digital zoom – is selected, the On-Screen Menu disappears and “D. zoom –” is displayed. Press the SELECT button to compress image size.

The projected image can be also compressed by pressing the D.ZOOM d button on the remote control.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM ed, SELECT, and Point buttons.

To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p.25) again, or adjust the screen size with the D.ZOOM ed buttons.

Press the SELECT button at Common or Reset, to display a confirmation box.

✔Note:

•When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Remote Control

POINT buttons

SELECT button D.ZOOM + button

D.ZOOM - button

✔Note:

•The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.29).

•The minimum compression ratio is limited depending on the input signal or when the Keystone function is working.

•True, Full screen, and Digital zoom

+/– cannot be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.26).

•Digital zoom +/– cannot be selected when Full screen or True is selected.

http://www.pureglare.com.au 33