Video Input
Image Level Adjustment
1 | Press the MENU button to display the |
| Menu. Use the Point 7 8 buttons to move the red |
| frame pointer to the Image Adjust Menu icon. |
2 | Use the Point ed buttons to move the red frame |
| pointer to the desired item and then press the SELECT |
button. The level of each item is displayed. Adjust each level by pressing the Point 7 8 buttons.
Contrast
Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63).
Color
Press the Point 7 button to decrease the intensity of the color; press the Point 8 button to increase the intensity of the color (from 0 to 63).
Tint
Use the Point 7 8 buttons to adjust the tint value to get a proper color balance (from 0 to 63).
Color temp.
Use the Point 7 8 buttons to select the desired Color temp. level (XLow, Low, Mid, or High).
White balance (Red)
Press the Point 7 button to lighten the red tone; press the Point 8 button to deepen the red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten the green tone; press the Point 8 button to deepen the green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten the blue tone; press the Point 8 button to deepen the blue tone (from 0 to 63).
✔Note:
•The Tint cannot be selected when the video system is PAL, SECAM,
•After adjusting the White balance Red, Green or Blue, the Color temp. level will change to “Adj.”.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer to the desired item and then press the SELECT button.
Use the Point 7 8 buttons to adjust the value.
Press the SELECT button here to display other items.
Press the SELECT button here to display previous items.
38 | http://www.pureglare.com.au |