Sanyo POA-PN40 owner manual Connection of LAN cable

Page 17

Installation and network configuration

Connection of LAN cable

To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) straight cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub (10Base-T or 100Base-TX) to distribute the network cable if required.

1 Disconnect the AC plug from the projector.

2 Connect the UTP straight cable to the LAN port on the Network Unit.

3 Connect the UTP straight cable to the hub.

Hub

(10Base-T, 100Base-TX)

Projector

UTP straight cable

✐Use the UTP cross cable when you connect the computer and projector directly not using the hub.

✐When you connect the projector into the 10Base-T network, use cable with category 3 or 5. When you connect the projector into the 100Base-TX network, use cable with category 5.

✐The length of cable between hub and projector should be less than 100m.

PJ-NET ORGANIZER

OWNER'S MANUAL

ENGLISH

17

Image 17

Contents PJ-Net Organizer Trademarks ComplianceFederal Communication Commission Notice Use of this manual Expression/AbbreviationContents Contents Page Chapter Preparation Web Management function p.39 FeaturesMail Alert function p.32 Snmp Agent function p.36Control port ready for external equipment p.61 Automatic On/Off using Clock function p.51Multi-control function p.56 Operating environment Package contains Before usePreparation Chapter Installation Function of the Network Unit p.15 Flow of installationInstallation and network configuration p.16-22 Name and function of each part Mounting Installation and network configurationConnection of LAN cable Configure the network Network configurationConfirmation of the network menu Selection of network menuHow to enter the numbers Configuration for IP Address/ Sub net/ Gateway*1/DNS*2Fixing the network configuration Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Main setting page in the Standard Mode display Display of main settingMain setting page in the Light Mode display How to use the settingText box setting Type of the setting palletWith the Network Unit Initial settingWhats PJLink? PJLink and password settingAuto setting Date and time settingNetwork configuration Setting Smtp server and administrator address Mail settingOption selection for sending alert mail Registering and deleting E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp settingSnmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status checkStatus Description About projector conditionInput ControlsAvailable selection when the VIDEO/S-VIDEO input Available selection when the ComputerAnalog inputAvailable selection when the Y, Cb/Pb, Cr/Pr input SystemSelect an image mode Image adjustmentMenu SoundPC adjustment Input source Screen mode Video Computer Setting up the projectorLamp Corres. Value Reset Save/delete the settings Save the controls and settingsLoad a control set Check the saved itemsSet a day or date Timer settingHow to set the timer Change the event mode Check the timer eventsSet an execute time Select an event actionProjector Power Event Items Description Projector informationTime, replace lamp immediately Indication of the lamp statusMulti-control Controlling and setting the multi-projectorsStart/stop the multi control Confirmation of registered projector Register the projectorStatus Change the mode of the registered projectorControlling all together Conf. & Change page in the light modeSetting all together Chapter Use of Serial Port Use of Serial Port Serial port settingSetting examples for the serial control Example Control examplesPJ3 PJ2 PJ1 Preparation Use of telnetUse of telnet Control the projector with telnet Command list tableChapter Appendix Peer-To-Peer connection Examples of connectionEntrance hall Gateway Router installed in the networkProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting Netscape Navigator JavaScript SettingProxy setting TCP/IP Product specificationSerial port specification Port specificationLAN port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?1AA6P1P5006-- Idzg