Sanyo POA-PN40 owner manual Use of telnet

Page 67

Use of telnet

3 When communication is established, the word "PASSWORD:" appears on the window. Type the login password (PIN code) for the projector and then press

"Enter" key on the keyboard. If you do not set up the network PIN code, just press "Enter" key.

When the word "Hello" is replied, login has been succeeded.

4 Type the commands from the key board to control the external equipment and then press "Enter" key for termination. For example, type "C00" and press "Enter" key.

*"C00" is a command to turn the projector on.

-The extra projector will be turned on.

To disconnect the communication, press "Ctrl" key and "]" key at the same time.

*1 Further instructions about the telnet application, please see the on-line guide on your com- puter.

*2 The commands are defined by each product independently, so please consult the manufac- turer or sales dealer for further information of the commands.

*The password is a network PIN code decided item "Network PIN code setting" (☞P.20, 29). If the authentication of the entered password is failed 4 times continuously, the communication will be disconnected automatically. Please try again for the connection.

PJ-NET ORGANIZER

OWNER'S MANUAL

ENGLISH

67

Image 67

Contents PJ-Net Organizer Federal Communication Commission Notice ComplianceTrademarks Use of this manual Expression/AbbreviationContents Contents Page Chapter Preparation Snmp Agent function p.36 FeaturesWeb Management function p.39 Mail Alert function p.32Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Package contains Before usePreparation Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Mounting Installation and network configurationConnection of LAN cable Selection of network menu Network configurationConfigure the network Confirmation of the network menuCompleting of installation Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Fixing the network configurationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Main setting page in the Standard Mode display Display of main settingMain setting page in the Light Mode display How to use the settingText box setting Type of the setting palletWith the Network Unit Initial settingWhats PJLink? PJLink and password settingAuto setting Date and time settingNetwork configuration Setting Smtp server and administrator address Mail settingOption selection for sending alert mail Registering and deleting E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp settingSnmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status checkStatus Description About projector conditionInput ControlsSystem Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input Available selection when the Y, Cb/Pb, Cr/Pr inputSelect an image mode Image adjustmentMenu SoundPC adjustment Input source Screen mode Video Computer Setting up the projectorLamp Corres. Value Reset Save/delete the settings Save the controls and settingsLoad a control set Check the saved itemsHow to set the timer Timer settingSet a day or date Select an event action Check the timer eventsChange the event mode Set an execute timeProjector Power Event Items Description Projector informationTime, replace lamp immediately Indication of the lamp statusMulti-control Controlling and setting the multi-projectorsStart/stop the multi control Confirmation of registered projector Register the projectorStatus Change the mode of the registered projectorSetting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Use of Serial Port Serial port settingSetting examples for the serial control Example Control examplesPJ3 PJ2 PJ1 Preparation Use of telnetUse of telnet Control the projector with telnet Command list tableChapter Appendix Peer-To-Peer connection Examples of connectionEntrance hall Gateway Router installed in the networkActive Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting Netscape Navigator JavaScript SettingProxy setting TCP/IP Product specificationLAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?1AA6P1P5006-- Idzg