Sanyo POA-PN40 Network configuration, Confirmation of the network menu, Configure the network

Page 18

Chapter 2 Installation

Network configuration

Confirmation of the network menu

When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item "Mounting" (☞ p.16).

Configure the network

Before performing the network configuration, prepare network address numbers (IP Address, Subnet Mask, Default Gateway, DNS) assigned to the projector. Ask your network administrator for the network address.

For example, the case where the following network address is set up is explained.

IP Address	: 192.168.1.201
Subnet Mask	: 255.255.255.0
Default Gateway	: 192.168.1.1
DNS	: 0.0.0.0

The default network configuration is set as follows.

IP Address	: 192.168.0.2
Subnet Mask	: 255.255.255.0
Default Gateway	: 0.0.0.0
DNS	: 0.0.0.0

LINK	ACT

1 Selection of network menu

Turn on the projector and display the menu on the screen. Select network icon from the main menu and then press SELECT button once. Check that the mode is "On". If not, change mode to "On" using the pointer buttons (7,8).

Select "On" or "Off" with 7,8 button

Network icon

18 ✐ The network unit begins restarting each time the mode is set "On".

Image 18

Contents PJ-Net Organizer Compliance Federal Communication Commission NoticeTrademarks Expression/Abbreviation Use of this manualContents Contents Page Chapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.39 Snmp Agent function p.36Automatic On/Off using Clock function p.51 Multi-control function p.56Control port ready for external equipment p.61 Operating environment Before use Package containsPreparation Chapter Installation Flow of installation Installation and network configuration p.16-22Function of the Network Unit p.15 Name and function of each part Installation and network configuration MountingConnection of LAN cable Confirmation of the network menu Network configurationConfigure the network Selection of network menuFixing the network configuration Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Login the setting page of the projector Select a display mode and loginEnter the IP address Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the Y, Cb/Pb, Cr/Pr input Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input SystemImage adjustment Select an image modeSound MenuPC adjustment Setting up the projector Input source Screen mode Video ComputerLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setTimer setting How to set the timerSet a day or date Set an execute time Check the timer eventsChange the event mode Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projectorChange the mode of the registered projector StatusConf. & Change page in the light mode Setting all togetherControlling all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallWeb browser setting Active Script/JavaScript enableProxy setting ActiveScript setting Examples OS/BrowsersWindows XP Professional Internet Explorer Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPPort specification LAN port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?1AA6P1P5006-- Idzg