Sanyo POA-PN40 owner manual Image adjustment, Select an image mode

Chapter 4 Controlling the Projector

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item	Description
Contrast	Adjusts picture contrast (0~ 63)
Brightness	Adjusts picture brightness (0~ 63)
Color	Adjusts picture color saturation (0~ 63)
Tint	Adjusts picture hue (0~ 63)

Item	Description
Color Temp	Sets a color temperature mode. (X Low, Low, Mid, High,
White Balance	Adj.)
Red, Green,	Adjusts each white balance respectively. (0~ 63)
Blue
Sharpness	Adjusts picture sharpness. (0~ 31)

*When changing the value of the white balance, the color temp. indicates "Adj."

Item	Description
Gamma	Adjusts brightness of darker part of the picture. (0~ 15)
Noise reduction...	Switches noise reduction mode (OFF, L1, L2)
Progressive scan...Switches progressive mode (ON, OFF, Film)
Reset	Resets the Image adjustment to previous levels.
Store	Stores the Image adjust-
	ment values. Select an
	item [Image1 - Image10]
	from the pull-down menu
	and click Store button.
Load	Loads the Image mode.
	Select an image mode

from the pull-down menu and click Load button. There may not be available mode depending on the input mode as shown in

44

	Input source
Image mode	Video	Computer
Standard(AV)	✔	*
Cinema	✔	*
Standard(PC)	*	✔
Real	*	✔
Image1 - 10	✔	✔

the table left.

✐The mark "✔" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".