Sanyo POA-PN40 Configuration for IP Address/ Sub net/ Gateway1/DNS2, How to enter the numbers

Page 19

Installation and network configuration

2 Configuration for IP Address/ Sub net/ Gateway1/DNS2

Press SELECT button again. The following network setting pallet appears on the screen. Enter the specified network addresses.

The red frame moves sequentially left or right with 7 8 button.

The number up or down with d e button.

How to enter the numbers

There are 2 ways to enter the numbers, one is by using the point buttons (d e ) on the remote control or on the projector, the other is by using the screen 10-key pallet by which the numbers can be entered directory. For further information see "How to enter the numbers with the screen 10-key pallet" (☞ p.21).

3 Fixing the network configuration

After completing the entering of address, select "SET" and press SELECT button. The Network Unit starts re- booting and displays message "Please wait..." on the screen until the re-booting is complete. Do not discon-

nect the AC cord during this period. After that the menu will disappear on the screen.

Completing of installation

Now the installation is complete. The IP address of this projector is set to "192.168.1.201".

Item	Description
IP address	Sets IP address of the projector
Sub net	Sets Subnet mask. Normally sets 255.255.255.0
Gateway*1	Sets IP address of the default gateway (Router)
DNS*2	Sets IP address of the DNS server. Must be set when using the e-mail function

✻Refer to the projector's owner's manual for operation of the projector.

*1 In the network environments not using a Gateway or Router, the Default Gateway address should be set to [0.0.0.0].

*2 If you do not use the functions E-mail or DNS server, it is also set [0.0.0.0] for the DNS address.

PJ-NET ORGANIZER

OWNER'S MANUAL

ENGLISH

19

Image 19

Contents PJ-Net Organizer Federal Communication Commission Notice ComplianceTrademarks Use of this manual Expression/AbbreviationContents Contents Page Chapter Preparation Snmp Agent function p.36 FeaturesWeb Management function p.39 Mail Alert function p.32Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Package contains Before usePreparation Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Mounting Installation and network configurationConnection of LAN cable Selection of network menu Network configurationConfigure the network Confirmation of the network menuCompleting of installation Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Fixing the network configurationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Main setting page in the Standard Mode display Display of main settingMain setting page in the Light Mode display How to use the settingText box setting Type of the setting palletWith the Network Unit Initial settingWhats PJLink? PJLink and password settingAuto setting Date and time settingNetwork configuration Setting Smtp server and administrator address Mail settingOption selection for sending alert mail Registering and deleting E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp settingSnmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status checkStatus Description About projector conditionInput ControlsSystem Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input Available selection when the Y, Cb/Pb, Cr/Pr inputSelect an image mode Image adjustmentMenu SoundPC adjustment Input source Screen mode Video Computer Setting up the projectorLamp Corres. Value Reset Save/delete the settings Save the controls and settingsLoad a control set Check the saved itemsHow to set the timer Timer settingSet a day or date Select an event action Check the timer eventsChange the event mode Set an execute timeProjector Power Event Items Description Projector informationTime, replace lamp immediately Indication of the lamp statusMulti-control Controlling and setting the multi-projectorsStart/stop the multi control Confirmation of registered projector Register the projectorStatus Change the mode of the registered projectorSetting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Use of Serial Port Serial port settingSetting examples for the serial control Example Control examplesPJ3 PJ2 PJ1 Preparation Use of telnetUse of telnet Control the projector with telnet Command list tableChapter Appendix Peer-To-Peer connection Examples of connectionEntrance hall Gateway Router installed in the networkActive Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting Netscape Navigator JavaScript SettingProxy setting TCP/IP Product specificationLAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?1AA6P1P5006-- Idzg