Sanyo POA-PN40 owner manual Control the projector with telnet, Command list table

Page 68

Chapter 5 Use of Serial Port

Control the projector with telnet

This product allows you to control the projector by using the telnet application. Normally, it is used for controlling the external equipment connected to the serial port but it also controls the projector by specifying the telnet port number 10000.

*To control the projector with telnet application is not depending on the serial port set- ting.

In the step 2 of the previous page, enter port number "10000" after the IP address number. > open 192.168.1.201 10000 [return]

* Use the IP address assigned to the pro- jector

After the communication is established, type the password (PIN code) and the com- mand for controlling the projector and then press "Enter" key.

The table below shows the typical command lists for controlling the our projector and please consult your local dealer for further information of another commands.

Command list table

Command	Function
C00	Power on
C02	Power off
C05	Selects input1
C06	Selects input2
C07	Selects input3
C09	Volume up
C0A	Volume down
C0B	Audio Mute on
C0C	Audio Mute off
C0F	Screen Normal size
C10	Screen Full size
C1C	Menu display on
C1D	menu display off
C23	Input2 (Video)
C24	Input2 (Y,Pb/Cb,Pr/Cr)
C25	Input2 (RGB)
C33	Input3 (Video)
C34	Input3 (S-Video)
C35	Input3 (Y,Pb/Cb,Pr/Cr)

68

Image 68

Contents PJ-Net Organizer Trademarks ComplianceFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Contents Page Chapter Preparation Features Web Management function p.39Mail Alert function p.32 Snmp Agent function p.36Control port ready for external equipment p.61 Automatic On/Off using Clock function p.51Multi-control function p.56 Operating environment Before use Package containsPreparation Chapter Installation Function of the Network Unit p.15 Flow of installationInstallation and network configuration p.16-22 Name and function of each part Installation and network configuration MountingConnection of LAN cable Network configuration Configure the networkConfirmation of the network menu Selection of network menuConfiguration for IP Address/ Sub net/ Gateway*1/DNS*2 How to enter the numbersFixing the network configuration Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the ComputerAnalog input Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input SystemImage adjustment Select an image modeSound MenuPC adjustment Setting up the projector Input source Screen mode Video ComputerLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setSet a day or date Timer settingHow to set the timer Check the timer events Change the event modeSet an execute time Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projectorChange the mode of the registered projector StatusControlling all together Conf. & Change page in the light modeSetting all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPSerial port specification Port specificationLAN port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?1AA6P1P5006-- Idzg