Sanyo POA-PN40 owner manual Snmp setting

Page 37

SNMP setting

Trap

Item Description

Community name ...Enter community name to send "Trap". Default name is "public".

Trap address......Enter IP address of the SNMP manager computer

to receive "Trap".

Trap check/delete

Check and delete the trap address

Checking the registered trap address and deleting the address.

To delete the address, tick check box in front of the IP address and click Delete button.

✐Up to 10 trap addresses can be registered.

Trap option

Trap option setting

Tick check boxes in front of the condition item to send the trap.

✐Click Set button if you tick or un-tick the check box on a page.

[1]–––––––––––––––––––––––––––––––––––

❏When PJ lamp is off.

❏When the life span of lamp is reached.

❏When internal PJ power circuit is failed.

❏When internal PJ temperature is too high.

❏When PJ is turned off with power ON/OFF but- ton.

[2]–––––––––––––––––––––––––––––––––––

❏When Power management function turns PJ lamp off.

❏When the signal is interrupted.

❏ When lamp Corres. Value reaches [ ] hours.

ENGLISH

✐Up to 99,999 hours can be set for the time setting.

PJ-NET ORGANIZER

OWNER'S MANUAL

37

Image 37

Contents PJ-Net Organizer Federal Communication Commission Notice ComplianceTrademarks Use of this manual Expression/AbbreviationContents Contents Page Chapter Preparation Web Management function p.39 FeaturesMail Alert function p.32 Snmp Agent function p.36Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Package contains Before usePreparation Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Mounting Installation and network configurationConnection of LAN cable Configure the network Network configurationConfirmation of the network menu Selection of network menuHow to enter the numbers Configuration for IP Address/ Sub net/ Gateway*1/DNS*2Fixing the network configuration Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Main setting page in the Standard Mode display Display of main settingMain setting page in the Light Mode display How to use the settingText box setting Type of the setting palletWith the Network Unit Initial settingWhats PJLink? PJLink and password settingAuto setting Date and time settingNetwork configuration Setting Smtp server and administrator address Mail settingOption selection for sending alert mail Registering and deleting E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp settingSnmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status checkStatus Description About projector conditionInput ControlsAvailable selection when the VIDEO/S-VIDEO input Available selection when the ComputerAnalog inputAvailable selection when the Y, Cb/Pb, Cr/Pr input SystemSelect an image mode Image adjustmentMenu SoundPC adjustment Input source Screen mode Video Computer Setting up the projectorLamp Corres. Value Reset Save/delete the settings Save the controls and settingsLoad a control set Check the saved itemsHow to set the timer Timer settingSet a day or date Change the event mode Check the timer eventsSet an execute time Select an event actionProjector Power Event Items Description Projector informationTime, replace lamp immediately Indication of the lamp statusMulti-control Controlling and setting the multi-projectorsStart/stop the multi control Confirmation of registered projector Register the projectorStatus Change the mode of the registered projectorSetting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Use of Serial Port Serial port settingSetting examples for the serial control Example Control examplesPJ3 PJ2 PJ1 Preparation Use of telnetUse of telnet Control the projector with telnet Command list tableChapter Appendix Peer-To-Peer connection Examples of connectionEntrance hall Gateway Router installed in the networkActive Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting Netscape Navigator JavaScript SettingProxy setting TCP/IP Product specificationLAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?1AA6P1P5006-- Idzg