Sanyo POA-PN40 owner manual You can register up to 10 addresses

Page 82

Chapter 6 Appendix

Operation

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the set- ting is not effective to the projector. To control the projector with a web browser,

the projector must be in the powered-on condition. Also, projectors registered for multi-control cannot have any controls changed if they are in standby mode. But timer and clock settings are always effective, even for projectors in standby mode.

QWhy does it sometimes take a lot of time to complete the page display?

AThe display speed of the page depends on the network environment in which both the projector and computer are placed. It may take much time to complete

the page display if network traffic is heavy. Please consult your network adminis- trator. You can select the Light mode for displaying pages quickly (☞ p.24).

QI use many of the projectors in the network. How can I use names of the projectors to recognize each projector instead of IP addresses?

AYou can manage the projectors with nicknames instead of the IP address. Please see item "Multi-Control" for further information (☞ p.56).

By registering the projector name and IP address with the DNS server, it can be accessed with the nickname from the any computer referred to the DNS server. Please consult your network administrator (☞ p.31).

QHow many numbers of the E-mail address can I register in the E-mail setting page?

AYou can register up to 10 addresses.

82

Image 82

Contents PJ-Net Organizer Federal Communication Commission Notice ComplianceTrademarks Expression/Abbreviation Use of this manualContents Contents Page Chapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.39 Snmp Agent function p.36Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Before use Package containsPreparation Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Installation and network configuration MountingConnection of LAN cable Confirmation of the network menu Network configurationConfigure the network Selection of network menuFixing the network configuration Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the Y, Cb/Pb, Cr/Pr input Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input SystemImage adjustment Select an image modeSound MenuPC adjustment Setting up the projector Input source Screen mode Video ComputerLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setHow to set the timer Timer settingSet a day or date Set an execute time Check the timer eventsChange the event mode Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projectorChange the mode of the registered projector StatusSetting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallActive Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPLAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?1AA6P1P5006-- Idzg