Sanyo POA-PN40 owner manual Serial port setting, Use of Serial Port

Page 62

Chapter 5 Use of Serial Port

This product provides a serial control port (RS-232C) to control the external equipment through the serial cable. This function allows you to control the external equipment connected to the serial port on the Network Unit through the network, and control the projector through the serial cable with the external serial controller. Before connecting the external equipment, perform the setting "Serial Port setting" described below.

Serial port setting

This is to set up the serial port on the Network Unit. Display the set- ting page by clicking Serial Port setting sub menu in the Initial setting menu. To communicate with external equipment correctly, communi- cation condition must be set up to the same values as that the con-

nected equipment is using. When clicking on any item of the serial port setting, the setting pallet appears and set up each item and then click Set button*1.

Item	Description
Baud rate	Communication speed for serial port, select with the pull-down menu (300 ~ 115200)
Parity	Parity check, the ways for error detecting of the transferred data (None, Odd, Even)
Stop bit	Stop bit, Select the end of communication (1 or 2)
Flow control	Ways for communication flow (None, Xon/Xoff, RTS/CTS)
Data length	Selects the length of data (7 or 8)
Serial control	Selects equipment to control (External or Projector)
	External	Used to select when the external equipment connected to the serial
		port is controlled by the computer through the LAN port.
	Projector	Used to select when the projector is controlled by the serial controller
		connected to the serial port.
Port number	Specifies the port number of TCP/IP. The default number is 23. Use the same port
	number specified by application. There are some reserved port numbers*2. If one of
	those port numbers is used, the alert dialog window will appear and let you know that
	it is an invalid port number.

*1 This product will restart when "Port number" or "Serial Control" is changed and it takes about 20 seconds.

62

Image 62

Contents PJ-Net Organizer Trademarks ComplianceFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Contents Page Chapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.39 Snmp Agent function p.36Control port ready for external equipment p.61 Automatic On/Off using Clock function p.51Multi-control function p.56 Operating environment Before use Package containsPreparation Chapter Installation Function of the Network Unit p.15 Flow of installationInstallation and network configuration p.16-22 Name and function of each part Installation and network configuration MountingConnection of LAN cable Confirmation of the network menu Network configurationConfigure the network Selection of network menuFixing the network configuration Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the Y, Cb/Pb, Cr/Pr input Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input SystemImage adjustment Select an image modeSound MenuPC adjustment Setting up the projector Input source Screen mode Video ComputerLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setSet a day or date Timer settingHow to set the timer Set an execute time Check the timer eventsChange the event mode Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projector Change the mode of the registered projector StatusControlling all together Conf. & Change page in the light modeSetting all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPSerial port specification Port specificationLAN port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?1AA6P1P5006-- Idzg