Sanyo POA-PN40 owner manual Lamp Corres. Value Reset

Page 48

Chapter 4 Controlling the Projector

Item	Description
Logo	Sets on or off the logo display on the screen dur-
	ing the startup. (Default, My logo, OFF)
Background	Sets screen background to blue when no signal
Display	input. (Blue, My logo, Black (OFF))
Display	Switches on or off the on-screen menu display on
	the screen.(ON, OFF, CountdownOff)
Freeze	Sets the image to freeze mode.(ON, OFF)
Power	Sets into the selected power management mode
management	Sets into the selected power management mode
	(OFF, Ready or Shut down) if the input signal is
	interrupted and no control key is pressed for the
	specified period of time.
	*The specified time can be set 1 to 30 min.
On start	Sets the power-on mode when connecting the AC
	cord to the outlet. (ON, OFF)

Item Description

Lamp control* ....Selects lamp control mode. (Normal, Eco, Auto)

This function may be disabled depending on the projectors.

Lamp

Corres. Value(h)......Displays the lamp use time (Corresponding value)

of the lamp . Reset the time after lamp replace- ment.

Lamp Corres. Value Reset

1.Select a Lamp-1 radio button and then click Reset button.

2.Click OK button to execute the reset.

Item Description

Remote control

ID.....Sets the remote control ID.(Code 1 - Code 8)

Fan speed control ...... Sets the fan control speed. (Normal, Max)

Status ...........Indicates the current fan mode.

Factory default.... Sets all of the projector control items to the fac-

tory default setting except the following items. Lamp Corres. Value, PJ time, Network PIN code, Network setting

* This function is not effective for the settings of the network unit, Network address settings, e-

mail settings, etc.

PJ lock suspend....... When the projector has a security of PIN code

lock, disable this function temporarily by pressing Yes button.

Setting procedure

1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.

2. Access this page with the web browser,

3. Click Yes button on the PJ lock suspend.

* This function is disabled after the projector turns on.

48

Image 48

Contents PJ-Net Organizer Compliance Federal Communication Commission NoticeTrademarks Expression/Abbreviation Use of this manualContents Contents Page Chapter Preparation Features Web Management function p.39Mail Alert function p.32 Snmp Agent function p.36Automatic On/Off using Clock function p.51 Multi-control function p.56Control port ready for external equipment p.61 Operating environment Before use Package containsPreparation Chapter Installation Flow of installation Installation and network configuration p.16-22Function of the Network Unit p.15 Name and function of each part Installation and network configuration MountingConnection of LAN cable Network configuration Configure the networkConfirmation of the network menu Selection of network menuConfiguration for IP Address/ Sub net/ Gateway*1/DNS*2 How to enter the numbersFixing the network configuration Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Login the setting page of the projector Select a display mode and loginEnter the IP address Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the ComputerAnalog input Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input SystemImage adjustment Select an image modeSound MenuPC adjustment Setting up the projector Input source Screen mode Video ComputerLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setTimer setting How to set the timerSet a day or date Check the timer events Change the event modeSet an execute time Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projectorChange the mode of the registered projector StatusConf. & Change page in the light mode Setting all togetherControlling all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallWeb browser setting Active Script/JavaScript enableProxy setting ActiveScript setting Examples OS/BrowsersWindows XP Professional Internet Explorer Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPPort specification LAN port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?1AA6P1P5006-- Idzg