Sanyo POA-PN40 owner manual Setting examples for the serial control

Page 63

Serial port setting

Setting examples for the serial control

Setting for controlling the equipment connected to the serial port from the computer.

Serial Control :Selects "External"

Port number :Sets according to the computer specified port no. Do not use port number 10000*2.

Other Settings :Sets according to the communication condition of the equipment

Setting for controlling the projector from the serial con- troller connected to the serial port.

Serial Control :Selects "Projector"

Port number :Not specified. Do not use port number 10000*2.

Other Settings :Sets according to the communication condition

of the serial controller

Setting for controlling the projector from the computer through the LAN port.

Serial Control	:Not specified
Port number	:Not specified
Other Settings	:Not specified

* The port number of the computer must be used with 10000.

*2 The reserved port numbers are http (80), ftp (21), SNMP (25), POP3 (110) etc. The port num- ber 10000 is reserved to control the projector through the LAN port.

✐Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer.

✐There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually, when connecting between this product and a projector or a computer, use Reverse type of serial cable. When connecting DVD player etc., use Normal type.

PJ-NET ORGANIZER

OWNER'S MANUAL

ENGLISH

63

Image 63

Contents PJ-Net Organizer Compliance Federal Communication Commission NoticeTrademarks Use of this manual Expression/AbbreviationContents Contents Page Chapter Preparation Snmp Agent function p.36 FeaturesWeb Management function p.39 Mail Alert function p.32Automatic On/Off using Clock function p.51 Multi-control function p.56Control port ready for external equipment p.61 Operating environment Package contains Before usePreparation Chapter Installation Flow of installation Installation and network configuration p.16-22Function of the Network Unit p.15 Name and function of each part Mounting Installation and network configurationConnection of LAN cable Selection of network menu Network configurationConfigure the network Confirmation of the network menuCompleting of installation Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Fixing the network configurationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Login the setting page of the projector Select a display mode and loginEnter the IP address Main setting page in the Standard Mode display Display of main settingMain setting page in the Light Mode display How to use the settingText box setting Type of the setting palletWith the Network Unit Initial settingWhats PJLink? PJLink and password settingAuto setting Date and time settingNetwork configuration Setting Smtp server and administrator address Mail settingOption selection for sending alert mail Registering and deleting E-mail addressesExamples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp settingSnmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status checkStatus Description About projector conditionInput ControlsSystem Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input Available selection when the Y, Cb/Pb, Cr/Pr inputSelect an image mode Image adjustmentMenu SoundPC adjustment Input source Screen mode Video Computer Setting up the projectorLamp Corres. Value Reset Save/delete the settings Save the controls and settingsLoad a control set Check the saved itemsTimer setting How to set the timerSet a day or date Select an event action Check the timer eventsChange the event mode Set an execute timeProjector Power Event Items Description Projector informationTime, replace lamp immediately Indication of the lamp statusMulti-control Controlling and setting the multi-projectorsStart/stop the multi control Confirmation of registered projector Register the projectorStatus Change the mode of the registered projectorConf. & Change page in the light mode Setting all togetherControlling all together Chapter Use of Serial Port Use of Serial Port Serial port settingSetting examples for the serial control Example Control examplesPJ3 PJ2 PJ1 Preparation Use of telnetUse of telnet Control the projector with telnet Command list tableChapter Appendix Peer-To-Peer connection Examples of connectionEntrance hall Gateway Router installed in the networkWeb browser setting Active Script/JavaScript enableProxy setting ActiveScript setting Examples OS/BrowsersWindows XP Professional Internet Explorer Proxy setting Netscape Navigator JavaScript SettingProxy setting TCP/IP Product specificationPort specification LAN port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages?Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit?1AA6P1P5006-- Idzg