Sanyo POA-PN40 owner manual Network PIN code setting

Page 20

Chapter 2 Installation

Network PIN code setting

The network PIN code can be set to restrict access to the setting page of the projec- tor using the web browser.

✽Default network PIN code [0000] means no network PIN code is set.

1 Displaying network PIN code menu

Select network menu and then select "Network PIN code" sub menu. Press SELECT button twice to display the Network PIN code entry pallet.

* The number on the pallet is the current network PIN code.

Network PIN Code

2 Entering the network PIN code

To enter the network PIN code, use point but- tons (▲,▼,7,8) on the projector or the remote control.

3 Fixing the network PIN code

After entering a 4-digit number, select "SET" by using point buttons (7,8) and then press SELECT button.

The red frame moves sequentially left or right with 7 8 button.

The number up or down with d e button.

20

✐The screen 10-key pallet can be used for entering the network PIN code. See item "How to enter the numbers with the screen 10-key pallet" (☞. 21)

The new network PIN code change does not require for the authentication of current network PIN code. It is always effective a newly entered network PIN code. If you for- get the network PIN code, set a new network PIN code.

✐ It is recommended to set up the Network PIN code when you connect the projector to the network. This setting is carried out through the projector’s menu and also it can be set through the network using the web browser. For further information, refer to item "Initial Setting/Network PIN code setting" (☞ p.29).

✐ Valid characters for the network PIN code are only numbers 0 to 9. The number "0000" means no network PIN code is set.

✐ This network PIN code is not to restrict the use of the projector. This network PIN code is to set the security against the use of the projector through the network.

Image 20

Contents PJ-Net Organizer Trademarks ComplianceFederal Communication Commission Notice Expression/Abbreviation Use of this manualContents Contents Page Chapter Preparation Features Web Management function p.39Mail Alert function p.32 Snmp Agent function p.36Control port ready for external equipment p.61 Automatic On/Off using Clock function p.51Multi-control function p.56 Operating environment Before use Package containsPreparation Chapter Installation Function of the Network Unit p.15 Flow of installationInstallation and network configuration p.16-22 Name and function of each part Installation and network configuration MountingConnection of LAN cable Network configuration Configure the networkConfirmation of the network menu Selection of network menuConfiguration for IP Address/ Sub net/ Gateway*1/DNS*2 How to enter the numbersFixing the network configuration Completing of installationNetwork PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Display of main setting Main setting page in the Standard Mode displayHow to use the setting Main setting page in the Light Mode displayType of the setting pallet Text box settingInitial setting With the Network UnitPJLink and password setting Whats PJLink?Date and time setting Auto settingNetwork configuration Mail setting Setting Smtp server and administrator addressRegistering and deleting E-mail addresses Option selection for sending alert mailExamples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ informationSnmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation windowAbout projector condition Status DescriptionControls InputAvailable selection when the ComputerAnalog input Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input SystemImage adjustment Select an image modeSound MenuPC adjustment Setting up the projector Input source Screen mode Video ComputerLamp Corres. Value Reset Save the controls and settings Save/delete the settingsCheck the saved items Load a control setSet a day or date Timer settingHow to set the timer Check the timer events Change the event modeSet an execute time Select an event actionProjector Power Event Projector information Items DescriptionIndication of the lamp status Time, replace lamp immediatelyControlling and setting the multi-projectors Multi-controlStart/stop the multi control Register the projector Confirmation of registered projectorChange the mode of the registered projector StatusControlling all together Conf. & Change page in the light modeSetting all together Chapter Use of Serial Port Serial port setting Use of Serial PortSetting examples for the serial control Control examples ExamplePJ3 PJ2 PJ1 Use of telnet PreparationUse of telnet Command list table Control the projector with telnetChapter Appendix Examples of connection Peer-To-Peer connectionGateway Router installed in the network Entrance hallProxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting JavaScript Setting Netscape NavigatorProxy setting Product specification TCP/IPSerial port specification Port specificationLAN port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application?Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment?1AA6P1P5006-- Idzg