Sanyo PDG-DWL2500 owner manual Basic Operation, Turning On the Projector

Basic Operation

Turning On the Projector

1	Complete peripheral connections (with a computer,
	VCR, etc.) before turning on the projector.
2	Connect the projector’s AC power cord into an AC
	outlet. The POWER indicator lights red.
3	Press the ON/STAND-BY button on the remote
	control or on the top control. The POWER indicator
	lights green and the cooling fans start to operate. The
	preparation display appears on the screen and the
	countdown starts.
4	After the countdown, the input source that was
	selected the last time and the lamp control status icon

(See page 58) appear on the screen.

15

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp Control

Lamp control status

(See page 58 for Lamp control status.)

5	If there is no signal input when start on the projector,
	or the current signal is missed while operating the

projector, the Video / PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ed buttons and press the SELECT button. And then follow the input signal guidance window to correct the signal and connection.

If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.

4Note:

The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector.

Video / PC selection window

Input signal guidance window

Video / PC selection window

4Note:
• When the Logo select function is set to Off, the logo will
not be shown on the screen. (p.53)
• When Countdown off or Off is selected in the Display
function, the countdown will not be shown on the screen.	Input signal guidance window
(p.53)
• During the countdown period, all operations are invalid.
• When the Input search function is set to On 2, the input
signal will be searched automatically. (p.51)
• When Off is selected in the Display function, the Video
/PC selection window and the input signal guidance
window are not shown on the screen. (p.53)

20