Sanyo PDG-DWL2500 owner manual 800x600 37.879 60.320

Appendix

When the input signal is digital from HDMI terminal, refer to the chart below.

ON-SCREEN	RESOLUTION	H-FREQ..	V-FREQ..	3D
DISPLAY		[kHz]	[Hz]	DIPLAY
D-VGA	640x480	31.470	59.940	4
D-480i	720x480 i	15.734	59.94/60	4
D-480i	720x480 i	-	119.98/120	4
D-480p	720x480	31.470	59.880	4
D-480p	720x480	-	59.94/60	4
D-480p	720x480	62.940	119.98/120	4
D-575i	720x575 i		50.00	4
D-575i	720x575 i		100.00	4
D-575p	720x575	31.250	50.000	4
D-575p	720x575	62.500	100.00	4
D-SVGA	800x600	37.879	60.320	4
D-SVGA	800x600	76.300	120.000	4
D-XGA	1024x768	43.363	60.000	4
D-XGA	1024x768	97.550	120.000	4
D-WXGA 3	1376x768	48.360	60.000	4
D-WXGA 6	1280x768	47.776	59.870	4
D-WXGA 7	1280x768	60.289	74.893	-
D-WXGA 8	1280x768	68.633	84.837	-
D-WXGA 9	1280x800	49.600	60.050	4
D-WXGA 10	1280x800	41.200	50.000	4
D-WXGA 11	1280x800	49.702	59.810	4
D-WXGA 13	1360x768	97.533	119.970	4
D-WXGA 14	1280x768	97.396	119.800	4
D-WXGA 15	1280x800	101.563	119.910	4
D-SXGA 1	1280x1024	63.980	60.020	4
D-SXGA 2	1280x1024	60.276	58.069	-

ON-SCREEN	RESOLUTION	H-FREQ..	V-FREQ..	3D
DISPLAY		[kHz]	[Hz]	DIPLAY
D-SXGA+ 2	1400x1050	65.350	60.120	-
D-SXGA+ 3	1400x1050	65.120	59.900	-
D-SXGA+ 5	1400x1050	62.500	58.600	4
D-SXGA+ 6	1400x1050	64.744	59.948	4
D-SXGA+ 7	1400x1050	65.317	59.978	4
D-UXGA 1	1600x1200	75.000	60.000	4
D-WUXGA 2	1920 x 1200	74.038	59.950	-
D-WSXGA+ 1	1680 x 1050	65.290	59.954	-
D-WXGA+ 1	1440 x 900	55.935	59.887	4
D-720p	1280x720	45.000	59.94/60	4
D-720p	1280x720	37.500	50.000	4
D-720p	1280x720	90.000	119.98/120	4
D-720p	1280x720	75.000	100.00	4
D-1080i	1920x1080 i	33.750	59.94/60	4
D-1080i	1920x1080 i	28.125	50.000	4
D-1080i	1920x1080 i	67.500	119.98/120	4
D-1080i	1920x1080 i	56.200	100	4
D-1080p	1920x1080	33.750	30.000	-
D-1080p	1920x1080	28.125	25.000	-
D-1080p	1920x1080	27.000	24.000	-
D-1080p	1920x1080	67.500	59.94/60	-
D-1080p	1920x1080	56.250	50.000	-

4Note:

•The mark "4" indicates that the 3D image can be projected.

•Alphabet letter "i" placed beside some of the resolutions represents interlace signal.

•The specifications are subject to change without notice.

•Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings.

•When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image may not be projected on the screen. If an image is not projected correctly, restart your PC.

•Do not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected.

76