Sanyo PDG-DWL2500 owner manual Computer Input Input Source Selection Computer 2 RGB, Input Menu

Computer Input

Input Source Selection (Computer 2: RGB)

Direct Operation

Choose Computer 2 (RGB) by press the COMPUTER 2 button on the remote control.

Remote Control

COMPUTER 2 button

Computer 2 (RGB)*

4Note:

* COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR

OUT terminal as MONITOR OUT. "Monitor out" message will appear on the screen when COMPUTER 2 button is pressed while using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT.

	Menu Operation	Input Menu
1	Press the MENU button to display the On-Screen
	Menu. Press the Point ed buttons, move the highlight
	to Input and then press the Point 8 or the SELECT
	button.
2	Use the Point ed buttons to select Computer 2 and
	then press the SELECT button.
3	When Computer 2 is selected, analog RGB input
	source will be selected directly.

4Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.51).

31