Computer Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1 | Press the MENU button to display the | Screen Menu | |
Menu. Use the Point ed buttons to select Screen and | |||
| |||
| then press the Point 8 or the SELECT button. |
| |
2 | Use the Point ed buttons select the desired item and |
| |
| then press the SELECT button . |
|
Normal
Provide the image to fit the screen size while maintaining the aspect ratio of input signal.
Full
Provide the full screen image.
Wide (16:9)
Provide the image at the 16:9 wide screen ratio.
Zoom
Scale the image proportionally to fit the entire screen. Either side of image may go over the screen.
True
Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector automatically switches to the panning mode. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear.
Custom
Provide the last stored aspect screen image.
4Note:
•This projector can not display any resolution higher than 1920 x 1200. If your computer’s resolution is higher than that, lower the resolution before connecting to the projector.
•The image data other than 1280 x 800 is modified to fit the screen size in initial mode.
•True and Digital zoom +/– can not be selected when 480i, 575i, 480p, or 575p is selected in the PC System Menu (p.32).
•Zoom and Image Position Adjustment (p.25) will be canceled when Custom is selected in the Screen menu.
38