Sanyo PDG-DWL2500 owner manual Basic Operation Menu Bar

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 72-73.

Main Menu Sub-Menu

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩
①	Input	Used to select an input source from Computer 1, Computer 2, HDMI, Video or
		S-video. (pp.30-31, 41-42)
②	PC adjust	Select Auto PC adj.., Fine sync, Total dots, Horizontal, Vertical, Current mode and
		Clamp to adjust the parameters to match with the PC input signal format. (pp.33-35)

③Image select Used to select an image mode from among Dynamic, Standard, Real, Cinema and Image 1-4. (p.36)

④Image adjust

⑤Screen

For computer source, used to adjust computer image [Contrast, Brightness, Color temp.., White balance (Red/Green/Blue), Sharpness and Gamma]. (p.37)

For video or HDMI source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp.., White balance (Red/Green/Blue), Sharpness, Gamma, Noise reduction and Progressive]. (pp.44-45)

For computer source, used to adjust size of the image [Normal, Full, Wide (16:9), Zoom, True, Custom, Digital zoom +/–, Keystone, Ceiling, Screen aspect and Colorboard]. (pp.38-40)

For video or HDMI source, used to set size of image [Normal, Full, Wide (16:9), Zoom, Natural wide, Custom, Keystone, Ceiling, Screen aspect and Colorboard]. (pp.46-47)

⑥	Sound	Used to adjust the volume or mute the sound. (p.27)
⑦	Setting	Used to set the projector’s operating configurations. (pp.50-62)

⑧Information Display the input source information: Input, H-sync freq.., V-sync freq.., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock, Remote control, and SERIAL NO... (p.63)

⑨	Network	See owner’s manual of “Network Set-up and Operation”.
⑩	Guide	The key operation is displayed.

24