Information
Input Source Information Display
The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.
Direct Operation
Remote Control
The information menu changes each time you press the INFO. button on the remote control as follows.
page 1/2 a page 2/2 a hide a page 1/2 a • • • • •
While the information menu is displayed, press the Point 7 |
|
8 buttons to display the previous or next page. | INFO.. button |
Menu Operation
Press the Point ed buttons to select the Information. The
Information Menu is displayed.
See below for displayed information.
Information Menu
Input | The selected input source is displayed. |
The horizontal frequency of the input signal is displayed in KHz, or - - - | |
| no signal. |
The vertical frequency of the input signal is displayed in Hz, or - - - - Hz when no | |
| signal. Numbers of Hz doubles when during Interlace. |
Screen | The selected screen size is displayed. |
Language | The selected language is displayed. |
Lamp status | The selected lamp mode is displayed. |
Lamp counter | The cumulative lamp operating time is displayed. |
Power management | Off, Ready, Shut down or Timer is displayed. |
Key lock | The selected Key lock icon is displayed. |
PIN code lock | Off or On 1 or On 2 is displayed. |
Remote control | The selected remote code is displayed. |
SERIAL NO.. | The serial number of the projector is displayed. The serial number is used to service |
| the projector. |
63