Video Input
Input Source Selection (Component, Scart, HDMI)
Direct Operation | Remote Control |
Choose Computer 1(Component) or Computer 1(Scart) by pressing the the COMPONENT or COMPUTER 1 button on the remote control; choose HDMI by pressing the HDMI button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
COMPUTER 1 button 
Computer 1 (RGB)
Computer 1 (Scart)
HDMI button
HDMI
COMPONENT button
Computer 1
(Component)
| Menu Operation | Input Menu |
|
| |
1 | Press the MENU button to display the |
|
| Menu. Use the Point ed buttons to select Input and |
|
| then press the Point 8 or the SELECT button. |
|
2 | Use the Point ed buttons to select Computer 1 and |
|
| then press the Point 8 button; use the Point ed |
|
buttons to select Component or RGB(Scart) and then press the SELECT button.
OR
Use the Point ed buttons to select HDMI, and then press the SELECT button;
Component
RGB (Scart)
HDMI
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a
When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).
When the video signal is connected to the HDMI terminal, select HDMI.
4Note:
When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.51).
42