Sanyo PDG-DWL2500 owner manual Computer Input Computer System Selection, PC System Menu

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 75-76.)

One of the following messages may appear when:

Auto	When the projector can not recognize the	PC System Menu
	connected signal conforming to the provided
	PC Systems, Auto is displayed on the System
	Menu box and the Auto PC adjustment function
	works to display proper images. If the image is
	not projected properly, a manual adjustment is
	required. (pp.34-35)

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 69.)

Mode 1	The preset system is manually adjusted in the
	PC adjust Menu. The adjusted data can be
	stored in Mode 1-10. (pp.34-35)
	PC Systems provided in this projector is chosen.
XGA 1
	The projector chooses a proper system provided
	in the projector and displays it.

* Mode 1 and XGA 1 are examples.

Selected system in the PC System Menu is displayed.

Selecting Computer System Manually

PC system can also be selected manually.

			Customized Mode (1–10)
1	Press the MENU button to display the On-Screen		set in the PC adjust Menu
		PC System Menu	(pp.34-35).
	Menu. Use the Point ed buttons to select Input and
	then press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select System and then
	press the Point 8 or the SELECT button.
3	Use the Point ed buttons to select the desired system
	and then press the SELECT button.

Systems in this dialog box can be selected.

32