Hitachi CP-X265 user manual Option Menu, Auto OFF, Lamp Time, MY Button

Page 41

OPTION Menu

OPTION Menu (continued)

Item

 

Description

 

 

 

Using the buttons ▲/▼ adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)

 

AUTO OFF

AUTO OFF

 

ENABLE

DISABLE

 



0

AUTO OFF

When the time is set to 0, the projector is not turned off automatically.

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted from the control port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” (17).

 

The lamp time is the time counted after the last resetting. It is

 

shown in the OPTION menu as the usage time of the lamp.

 

Pressing the RESET button on the remote control or the button ►

 

of the projector displays a dialog. To reset the lamp time, select the

LAMP TIME

RESET using the button ▲.

 

 

RESET ï CANCEL

 

Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

For the lamp replacement, see the section "Lamp" (53, 54).

 

The filter time is the time counted after the last resetting. It is shown

 

in the OPTION menu as the usage time of the air filter.

 

Pressing the RESET button on the remote control or the button ► of the

 

projector displays a dialog. To reset the filter time, select the RESET using

FILTER TIME

the button ▲.

 

RESET ï CANCEL

 

• Please reset the filter time only when you have cleaned or replaced

 

the air filter, for a suitable indication about the air filter.

 

• For the air filter cleaning, see the section "Air filter" (55, 56).

 

Sets the assigned function for the MY BUTTON1 and 2 buttons on

 

the included remote control.

 

• RGB1: Sets port to RGB1.

 

• RGB2: Sets port to RGB2.

 

• COMPONENT: Sets port to COMPONENT.

 

S-VIDEO: Sets port to S-VIDEO.

 

• VIDEO: Sets port to VIDEO.

MY BUTTON

e-SHOT: Displays the e-SHOT menu (51).

• INFORMATION: Displays INPUT INFORMATION (43).

 

AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE correction (35).

MY MEMORY: Loads MY MEMORY settings (29).

PICTURE MODE: Changes the PICTURE mode (25).

FILTER RESET: Displays the filter time reset confirmation dialogue (41).

VOLUME+: Sets the volume up.

VOLUME-: Sets the volume down.

41

Image 41
Contents Trademark acknowledgment About this manualThank you for purchasing this projector Content About contents of package Fastening the lens cover Bottom side Part namesProjector Ports See below When utilizingRear-Left side Used for EthernetControl buttons Remote controlSetting up 169 Down ArrangementElevator feet Elevator button Adjusting the projectors elevatorSecurity Bar Anti-theft chain or wire sold separately Using the Security BarHow to attach About Plug-and-Play capability Connecting your devicesUSB Connecting to a NetworkExamples of connection with a computer Component video out Component video cable Examples of connection with a VCR/DVD playerP B P RAC inlet Connector Power cord Connecting power supplyPutting batteries Remote controlChanging the signal setting for the projectors remote sensor Using the remote controlTurning on the power Power on/offTurning off the power Off. Attach the lens coverSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signalSelecting an input signal Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature For a video signal or s-video signal  For a component video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenOperating the computer screen Available function Remote control operationUSB mouse and keyboard control Move pointerUsing the menu function Multifunctional settingsMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Picture Menu Adjust the level using the buttonsLight ó Dark GammaColor Temp Picture Menu~Note~ MY MemoryImage Menu PhaseOver Scan PositionAuto Adjust For a video signal or s-video signalFor a component video signal Image MenuProgressive Input MenuVideo NR Color SpaceComponent Input MenuVideo Format Frame LockCustom Resolution Setup Menu Using the buttons / switches the mode for mirror status Setup MenuVolume Normal ó Hinvert ó Vinvert ó H&VINVERTBlank Screen MenuMenu Position MyScreen Lock Screen MenuStart UP Message Auto on Option MenuAuto Search Auto OFF Option MenuLamp Time MY ButtonFAN Speed ServiceGhost Filter MessageRemote Freq Factory ResetUse the / button to change the Projectors remote sensor InformationInputting the Password Using Security FeaturesChanging the Password SecurityDescription If you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off If you have forgotten your PIN Code Turning Off the PIN Lock FunctionTurning On the Transition Detector Function Using the Transition Detector FunctionSetting the Transition Detector Password Setting the Transition Detector off IP Address Network MenuDhcp Network Menu Network Functions Lamp MaintenanceLamp Case of replacement by yourselfType number = CP-X256 DT00757, CP-X265 DT00751 Lamp coverHandle Filter cover Air filterType number = NJ22222 Air filter’s knob Air filterWill come up. Remove the battery Put a new battery Replacing Internal Clock batteryTake the old battery out Page There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Power switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workAudio setting is not correct Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableEither the focus and/or horizontal phase settings are Not properly adjustedWhisper function is working Lamp is approaching the end of its product LifetimeSpecifications Warranty and after-serviceSpecifications