Hitachi CP-X265 user manual Service, FAN Speed, Ghost, Filter Message, KEY Lock

Page 42

OPTION Menu

OPTION Menu (continued)

Item

Description

SERVICE

Selecting this item displays the SERVICE menu.

Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item.

FAN SPEED AUTO ADJUST GHOST FILTER MESSAGE KEY LOCK

FACTORY RESET INFORMATION REMOTE FREQ.

FAN SPEED

Using the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.

HIGH ó NORMAL

AUTO ADJUST

Using the buttons ▲/▼ enables/disables the automatic adjustment. When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.

ENABLE ó DISABLE

Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually.

GHOST

1.Select a color element of ghost using the buttons ◄/►.

2.Adjust the selected element using the buttons ▲/▼ to disappear ghost.

FILTER MESSAGE

Use the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air filter.

50h ó 100h ó 200h ó 300h ó TURN OFF

After selecting “50h”, “100h”, “200h”, or “300h”, the message

“REMINDER *** HRS PASSED AFTER THE LAST FILTER CHECK” will appear after the timer reaches the interval time set by the menu. (59) When the “TURN OFF” is chosen, the air filter cleaning message will not appear.

Please check and clean the air filter periodically, even if there is no message. If the air filter becomes to be blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.

It is recommended to choose “100h” in general. Please be careful with the operating environment of the projector and the condition of the air filter, especially when the “200h”, “300h” or “TURN OFF” is chosen.

KEY LOCK

Using the buttons ▲/▼ turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked.

TURN ON ó TURN OFF

Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.

42

Image 42
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content About contents of package Fastening the lens cover Part names ProjectorBottom side Rear-Left side When utilizingPorts See below Used for EthernetRemote control Control buttonsSetting up Arrangement 169 DownAdjusting the projectors elevator Elevator feet Elevator buttonUsing the Security Bar How to attachSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityConnecting to a Network Examples of connection with a computerUSB P B Examples of connection with a VCR/DVD playerComponent video out Component video cable P RConnecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Changing the signal setting for the projectors remote sensorTurning off the power Power on/offTurning on the power Off. Attach the lens coverOperating Adjusting the volumeSelecting an input signal Temporarily muting the soundSelecting an input signal Searching an input signalAdjusting the zoom and focus Selecting an aspect ratio For a video signal or s-video signal Using the automatic adjustment featureAdjusting the position  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenUSB mouse and keyboard control Available function Remote control operationOperating the computer screen Move pointerMenu button Enter button Cursor buttons Reset button Multifunctional settingsUsing the menu function Easy MenuEasy Menu Easy Menu Light ó Dark Adjust the level using the buttonsPicture Menu GammaPicture Menu Color TempMY Memory ~Note~Over Scan PhaseImage Menu PositionFor a component video signal For a video signal or s-video signalAuto Adjust Image MenuVideo NR Input MenuProgressive Color SpaceVideo Format Input MenuComponent Frame LockCustom Resolution Setup Menu Volume Setup MenuUsing the buttons / switches the mode for mirror status Normal ó Hinvert ó Vinvert ó H&VINVERTScreen Menu Menu PositionBlank Screen Menu Start UPMyScreen Lock Message Option Menu Auto SearchAuto on Lamp Time Option MenuAuto OFF MY ButtonGhost ServiceFAN Speed Filter MessageUse the / button to change the Projectors remote sensor Factory ResetRemote Freq InformationChanging the Password Using Security FeaturesInputting the Password SecurityTurning on the MyScreen Password Function Using the MyScreen Password FunctionDescription If you have forgotten your Password Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Network Menu DhcpIP Address Network Menu Network Functions Maintenance LampType number = CP-X256 DT00757, CP-X265 DT00751 Case of replacement by yourselfLamp Lamp coverAir filter Type number = NJ22222Handle Filter cover Air filter Air filter’s knobReplacing Internal Clock battery Take the old battery outWill come up. Remove the battery Put a new battery Page Internal temperature is rising TroubleshootingThere is no input signal Related messagesRegarding the indicator lamps Regarding the indicator lamps Signal cables are not correctly connected Electrical power cord is not pluggedPower switch is not set to the on position Signal source does not correctly workColor settings are not correctly adjusted Volume is adjusted to an extremely low levelAudio setting is not correct Color Space setting is not suitableWhisper function is working Not properly adjustedEither the focus and/or horizontal phase settings are Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationsSpecifications