Hitachi CP-X265 Whisper function is working, Lamp is approaching the end of its product Lifetime

Page 64

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

 

 

 

 

 

 

The brightness and/or contrast are adjusted to an

 

 

extremely low level.

25, 26

 

Adjust BRIGHTNESS and/or CONTRAST settings to a

 

 

 

higher level using the menu function.

 

Pictures appear

The WHISPER function is working.

 

dark.

Select NORMAL for the WHISPER item in the SETUP

26, 35

 

menu.

 

 

The lamp is approaching the end of its product

 

 

lifetime.

53, 54

 

Replace the lamp.

 

 

Either the focus and/or horizontal phase settings are

 

 

not properly adjusted.

19, 30

Pictures appear

Adjust the focus using the focus ring, and/or H PHASE

 

blurry.

using the menu function.

 

 

The lens is dirty or misty.

58

 

Clean the lens referring to the section “Caring for the lens”.

 

 

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect.

64

Image 64
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content About contents of package Fastening the lens cover Projector Part namesBottom side When utilizing Ports See belowRear-Left side Used for EthernetRemote control Control buttonsSetting up Arrangement 169 DownAdjusting the projectors elevator Elevator feet Elevator buttonHow to attach Using the Security BarSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a NetworkUSB Examples of connection with a VCR/DVD player Component video out Component video cableP B P RConnecting power supply AC inlet Connector Power cordRemote control Putting batteriesUsing the remote control Changing the signal setting for the projectors remote sensorPower on/off Turning on the powerTurning off the power Off. Attach the lens coverAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focusSelecting an input signal Selecting an aspect ratioUsing the automatic adjustment feature Adjusting the position For a video signal or s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Move pointerMultifunctional settings Using the menu functionMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Adjust the level using the buttons Picture MenuLight ó Dark GammaPicture Menu Color TempMY Memory ~Note~Phase Image MenuOver Scan PositionFor a video signal or s-video signal Auto AdjustFor a component video signal Image MenuInput Menu ProgressiveVideo NR Color SpaceInput Menu ComponentVideo Format Frame LockCustom Resolution Setup Menu Setup Menu Using the buttons / switches the mode for mirror statusVolume Normal ó Hinvert ó Vinvert ó H&VINVERTMenu Position Screen MenuBlank Start UP Screen MenuMyScreen Lock Message Auto Search Option MenuAuto on Option Menu Auto OFFLamp Time MY ButtonService FAN SpeedGhost Filter MessageFactory Reset Remote FreqUse the / button to change the Projectors remote sensor InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordTurning the Password off Using the PIN Lock FunctionRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Dhcp Network MenuIP Address Network Menu Network Functions Maintenance LampCase of replacement by yourself LampType number = CP-X256 DT00757, CP-X265 DT00751 Lamp coverType number = NJ22222 Air filterHandle Filter cover Air filter Air filter’s knobTake the old battery out Replacing Internal Clock batteryWill come up. Remove the battery Put a new battery Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationsSpecifications