Hitachi CP-X265 user manual Network Menu

NETWORK Menu

NETWORK Menu (continued)

Item			Operation
	Input the DEFAULT GATEWAY :
DEFAULT	Use the ▲/▼/◄/► buttons to enter the DEFAULT					0.	0.	0.	0
	GATEWAY (a node on a computer network that serves					DEFAULT GATEWAY
GATEWAY
	as an access point to another network) address.
	This function is available as long as DHCP is set to “TURN OFF”.
	Input the TIME DIFFERENCE :
	Use the ▲/▼ buttons to enter the TIME
TIME	DIFFERENCE.
	Set the same TIME DIFFERENCE as that on your
DIFFERENCE
	PC. If unsure, ask your network administrator.
	Use the ◄ button to return to the menu
	after setting the TIME DIFFERENCE.							㪞㪤㪫㩷㪇㩷㪇㪑㩷㪇㩷㪇㩷
	Input DATE AND TIME :
	Use the ▲/▼/◄/► buttons to enter the Year (last two digits),
	Month, Date, Hour and Minute.
DATE AND TIME	~Note~					DATE AND TIME
	The projector will override this setting and retrieve
	information from the Timeserver when SNTP is enabled. See [Date/
	Time Settings] in [User’s Manual - Network Functions: Configuring
	and Controlling the Projector via a Web Browser] for SNTP settings.
	e-SHOT display :
	Use the ▲/▼ buttons to select an item and the ► or ENTER
	buttons to display the image.
	Image1
	Image2			
		0'9  24'5		#6+10(+.'
	Image3
			+/#)' &'/1056#$.	64#6+10
	Image4
	File names of registered images are
	displayed by 16 characters or less.
	Example: DEMONSTRATION-01
	"NEW" stamp is added to the head of line when
e-SHOT	the image is registered newly. After the image							IMAGE‑1
	is displayed, "NEW" stamp will be erased.
	Once an image is displayed, you can use the				e‑SHOT
	▲/▼ buttons to page through the images. Use				RESET : IMAGE‑1
					ESC ,	+ :NO	ENTER		:YES
	the ◄ or ESC buttons to return to the menu.
	Pressing the RESET button on the remote control while an image is
	being displayed will display the RESET menu. The displayed image
	can be deleted from the RESET menu using the ENTER button on
	the remote control or the INPUT button on the projector.
	If you do not wish to delete the image use the ESC button on the remote
	control or push the ◄ and INPUT buttons on the projector at the same time.

~Note~

•Items with no image stored cannot be selected.

•Images can be changed using the ▲/▼ buttons while the image data downloads.

51