Hitachi CP-X265 Remote Freq, Use the / button to change the Projectors remote sensor, Information

OPTION Menu

OPTION Menu (continued)

Item		Description
	REMOTE FREQ.
	Use the ▲/▼ button to change the Projector's remote sensor
	setting (16).
	1:NORMAL ó 2:HIGH
	Items with a checkmark are on. The factory default setting is for
	both 1:NORMAL and 2:HIGH to be on. If the remote control does
	not function correctly set the this to either only 1 or only 2 as
	described in Remote Control Settings (16).
	Neither can be turned off at the same time.
	INFORMATION
	Selecting this item displays a dialog titled “INPUT INFORMATION”.
	It shows the information about the current input.
	INPUT-INFORMATION	INPUT-INFORMATION	INPUT-INFORMATION
SERVICE	RGB	S-VIDEO	COMPONENT
	04x768 @60Hz	SECAM	576i @50
	FRAME LOCK	AUTO	SCART RGB

•The “FRAME LOCK” message on the dialog means the frame lock function is working.

•The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in INPUT menu. (33)

•This item can't be selected for no signal and sync out.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and OPTION_SECURITY are not reset.

RESET ï CANCEL

43