Hitachi CP-X268A user manual Custom Resolution

INPUT Menu

INPUT Menu (continued)

Item

Description

The resolution for the RGB1 and RGB2 input signals can be set on this projector.

(1)In the INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button.

The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu select the		#761
	56#0&	Z
	%7561/
		
resolution you wish to display using the ▲/▼		
buttons.		
Selecting AUTO will set a resolution
appropriate to the input signal.	RESOLUTION MENU

(3)Pressing the ► or Enter button when selecting a STANDARD resolution will

	automatically adjust the horizontal and	INFORMATION
	vertical positions, clock phase and horizontal
			RGB
	size and automatically select an aspect ratio.	80x 768@ 60
	The INFORMATION dialog (45) will be
	displayed.
RESOLUTION	(4) To set a custom resolution use the ▲/▼	Z
	RESOLUTION BOX will be displayed. Set
*2	buttons to select CUSTOM and the CUSTOM
	the horizontal (HORZ) and vertical (VERT)	37+6		5'6
	resolutions using the ▲/▼/◄/►	CUSTOM RESOLUTION
	buttons. *1
		BOX
	(5) To save the setting place the cursor on the
		INFORMATION
	right-most digit and press the ► button.
			RGB
	The horizontal and vertical positions,	99x 744@ 60
	clock phase and horizontal size will be
	automatically adjusted and an aspect ratio will
	displayed for about 10 seconds the screen will	56#0&	
			Z
	be automatically selected.	%7561/
	After the INFORMATION(45) dialog has		#761
	return to the RESOLUTION menu displaying			
	the changed resolution.
	(6) To revert back to the previous resolution
	without saving changes place the cursor on
	the left-most digit and press the ◄ button.
	The screen will then return to the RESOLUTION menu displaying the
	previous resolution.

*1 Not all resolutions are guaranteed.

*2 For some pictures, this function may not work well.

36