Hitachi CP-X268A MIU Menu, See Live Mode in User’s Manual Network Functions for, Presentation

Page 52

MIU Menu

MIU Menu

Select [MIU] from the main menu to access the following functions.

2+%674'

.+8'/1&'

/#)'

2%.'5524'5'06#6+10

02

672

 

G5*16

5%4''

5'48+%'+0(14/#6+10

/+7126+10

 

'#5;/'07

 

NOTE • The factory default setting for DHCP is “TURN OFF”. If your network has DHCP enabled , and need to set [IP ADDRESS], [SUBNET MASK] and [DEFAULT GATEWAY] automatically, please set [DHCP] to “TURN ON”.

(User’s Manual - Network Functions)

If you are not utilizing SNTP (User’s Manual - Network Functions), then you must set the DATE AND TIME during the initial installation. Please refer to the item DATE AND TIME on the following list.

NOTE Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settings on this projector may cause unnecessary troubles on the network.

Item

Description

 

 

 

Display the screen appearing on the PC via Network.

LIVE MODE

Press the ► button or ENTER button to display the LIVE MODE

Menu.

 

See [LIVE MODE] in [User’s Manual – Network Functions] for

 

more information.

 

Make a presentation without a PC.

 

 

 

6*7/$0#+.

 

 

5.+&'5*19

PRESENTATION

the PC-LESS PRESENTATION Menu.

&+52.#;5+<'

-';%10(+)

PC-LESS

The data in the memory card are displayed.

 

Press the ► button or ENTER button to display

4' 64;

 

See [PC-LESS PRESENTATION] in [User’s

 

 

Manual - Network Functions] for more information.

 

52

Image 52
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Content Contents of package How to use the Slot cover lockPreparations Projector featuresFastening the lens cover Part names Bottom sideCB/PB ComponentCR/PR Control buttons Remote controlMagnify Setting up Arrangement Min Max DownAdjusting the projectors elevator Elevator feetHow to attach Using the Security BarSecurity Bar Anti-theft chain or wire sold separately Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a Network and USB MemoryUSB CB/PB CR/PRConnecting power supply AC inlet Connector Power cordInserting an SD Card and USB Memory Remote control Putting batteriesUsing the remote control Changing the signal setting for the projectors remote sensorPower on/off Turning on the powerTurning off the power STANDBY/ONAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focusSelecting an input signal  For a no signalUsing the automatic adjustment feature Adjusting the position For an RGB signal  For a video signal or s-video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenAvailable function Remote control operation Operating the computer screenUSB mouse and keyboard control Move pointerMultifunctional settings Using the menu functionMenu button Enter button Cursor buttons Reset button Easy MenuEasy Menu Easy Menu Adjust the level using the buttons Picture MenuLight ó Dark GammaPicture Menu Color TempMY Memory Phase Image MenuOver Scan PositionImage Menu Auto AdjustSize Input Menu ProgressiveVideo NR Color SpaceInput Menu ComponentVideo Format Frame LockCustom Resolution Setup Menu Setup Menu Using the buttons / switches the mode for mirror statusVolume AudioMenu Position Screen MenuBlank Screen Menu Start UPMyScreen MyScreen LockNo Input is Detected Sync is OUT of RangeMessage Source NameOption Menu Turn on  Turn OFFAuto Search Auto onOption Menu Auto OFFLamp Time MY ButtonService FAN SpeedGhost Filter MessageFactory Reset Remote FreqUse the / button to change the Projectors remote sensor InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function Description If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordTurning the Password off Using the PIN Lock FunctionRegistering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN CodeSetting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off Live Mode See Live Mode in User’s Manual Network Functions forMIU Menu PresentationDhcp Dynamic Host Configuration Protocol SetupMIU Menu OperationDefault Gateway IP AddressSubnet Mask Time DifferenceNetwork Mode ModeEncryption SpeedMIU Restart Maintenance LampLamp Case of replacement by yourselfType number = DT00751 Type number = NJ22222 Air filterHandle Filter cover Air filter Air filter’s knobTake the old battery out Replacing Internal Clock batteryWill come up. Remove the battery Put a new battery Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Regarding the indicator lamps Electrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Signal source does not correctly workVolume is adjusted to an extremely low level Audio setting is not correctColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Either the focus and/or horizontal phase settings areWhisper function is working Lamp is approaching the end of its product LifetimeWarranty and after-service SpecificationsSpecifications