Hitachi CP-X268A user manual Screen Menu, Menu Position, Blank

SCREEN Menu

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

2+%674'		.	)7#)'		'0). 5*
/#)			'07215+6+10
+02		$. - $.#%-
	2	56 46 72		14+)+0#.
%4''
126+10		[ ETGGP .QEM				((
/+7			5#)' 674010
'#5;/'07		/5174%'0#/'

Item

Description

	Using the buttons ▲/▼ switches the OSD (On Screen Display)
	language.
	ENGLISH ó FRANÇAIS ó DEUTSCH ó ESPAÑOL ó ITALIANO
LANGUAGE	NORSK ó NEDERLANDS ó PORTUGUÊS ó 日本語
	ó	ó	ó SVENSKA ó
		SUOMI ó POLSKI ó TÜRKÇE
MENU POSITION	Using the buttons ◄/►/▲/▼ adjusts the menu position.
	To quit the operation, press the MENU button on the remote control
	or keep no operation for about 10 seconds.
	Using the buttons ▲/▼ switches the mode for the blank screen.
	The blank screen is a screen for the temporarily blanking feature
	(24). It is displayed by pressing the BLANK button on the remote
	control.
	MyScreen ó ORIGINAL ó BLUE ó WHITE ó BLACK
BLANK	MyScreen is a screen you can register as a desired screen. The
	ORIGINAL screen is the existing standard screen. BLUE, WHITE
	and BLACK are non-patterned (plain) screens in each color.

•To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes.

•For the MyScreen, please refer to the MyScreen item (40).

39